ESC-ESP32C3
Adi1011-Data·ESC-ESP32C3
About the ESC-ESP32C3 PCB
ESC-ESP32C3 is an open source PCB design by Adi1011-Data, published on GitHub. It is a 4-layer board measuring 19.8 × 21.9 mm, with 41 components from 14 distinct parts.
Other key parts include the MPU-6050. By type, the board carries 14 capacitors, 14 resistors, 6 diodes, 4 transistors, 2 connectors and 1 IC.
It belongs with the robotics & motion, sensors and power & battery designs in this gallery.
From the project
This repository contains the PCB for electronic speed controller used for micro drone based on ESP32 family. The PCB was originally designed for the micro drone application based on coreless brushed motors
A small brushed-motor ESC and flight-controller board for a drone built around a Seeed Studio XIAO ESP32-C3. The XIAO is the flight controller. An MPU6050 on the board supplies the accelerometer and gyroscope. Four 720 coreless motors are switched by AO3400A MOSFETs. The drone is flown from the ESP-Drone phone app over the XIAO's Wi-Fi.
Motor side. The XIAO plugs into headers J1 and J3. M1–M4 are the motor pads.

Main components on the ESC-ESP32C3
ESC-ESP32C3 bill of materials (BOM)
41 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MPU-6050 | InvenSense_QFN-24_4x4mm_P0.5mm | U1 |
| 4 | AO3400A | SOT-23 | Q1, Q2, Q3, Q4 |
| 2 | CONN_01X07_PIN Conn_01x07_Pin | PinHeader_1x07_P2.54mm_Vertical | J1, J3 |
| 4 | SS14 | D_SOD-323_HandSoldering | D1, D2, D3, D4 |
| 2 | LED | LED_0402_1005Metric_Pad0.77x0.64mm_HandSolder | D5, D6 |
| 1 | 2.2NF 2.2nF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1 |
| 2 | 0.1UF 0.1uF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2, C4 |
| 1 | 10NF 10nF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3 |
| 9 | 100NF 100nF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C5, C6, C7, C8, C9, C10, C11, C12 +1 |
| 1 | 100UF 100uF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C14 |
| 6 | 10K 10k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R2, R3, R4, R5, R6 |
| 4 | 100R | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R7, R8, R9, R10 |
| 2 | 100K 100k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R11, R12 |
| 2 | 1.5K 1.5k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R13, R14 |
ESC-ESP32C3 design files
The KiCad project lives in the Adi1011-Data/ESC-ESP32C3 repository on GitHub; these links point at the commit this page was built from.
- LayoutESC.kicad_pcb
- SchematicESC.kicad_sch
- BOMESC-BOM.csv
ESC-ESP32C3: common questions
How big is the ESC-ESP32C3 PCB?
The ESC-ESP32C3 measures 19.8 × 21.9 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the ESC-ESP32C3?
41 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESC-ESP32C3 design files?
From the Adi1011-Data/ESC-ESP32C3 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ESC-ESP32C3 design in my own project?
The repository has no license, so all rights stay with Adi1011-Data. Use it as a reference, and ask the author before reusing the design.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k