ESP-Drone

Adi1011-Data·ESP-Drone·hardware/PCB/ESC/ESC.kicad_pcb

ESP-Drone PCB layout, top view — open source board by Adi1011-Data

About the ESP-Drone PCB

ESP-Drone is an open source PCB design by Adi1011-Data, published on GitHub. It is a 4-layer board measuring 19.8 × 21.9 mm, with 41 components from 14 distinct parts.

Other key parts include the MPU-6050. By type, the board carries 14 capacitors, 14 resistors, 6 diodes, 4 transistors, 2 connectors and 1 IC.

It belongs with the robotics & motion, sensors and power & battery designs in this gallery.

From the project

A small brushed-motor ESC and flight-controller board for a drone built around a Seeed Studio XIAO ESP32-C3. The XIAO is the flight controller. An MPU6050 on the board supplies the accelerometer and gyroscope. Four 720 coreless motors are switched by AO3400A MOSFETs. The drone is

A small brushed-motor ESC and flight-controller board for a drone built around a Seeed Studio XIAO ESP32-C3. The XIAO is the flight controller. An MPU6050 on the board supplies the accelerometer and gyroscope. Four 720 coreless motors are switched by AO3400A MOSFETs. The drone is flown from the ESP-Drone phone app over the XIAO's Wi-Fi.

Motor side. The XIAO plugs into headers J1 and J3. M1–M4 are the motor pads.

ESP-Drone, from the project README
From the project README

Main components on the ESP-Drone

ESP-Drone bill of materials (BOM)

41 components, 14 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MPU-6050
U1
4
AO3400A
Q1, Q2, Q3, Q4
2
CONN_01X07_PIN
Conn_01x07_Pin
J1, J3
4
SS14
D1, D2, D3, D4
2
LED
D5, D6
1
2.2NF
2.2nF
C1
2
0.1UF
0.1uF
C2, C4
1
10NF
10nF
C3
9
100NF
100nF
C5, C6, C7, C8, C9, C10, C11, C12 +1
1
100UF
100uF
C14
6
10K
10k
R1, R2, R3, R4, R5, R6
4
100R
R7, R8, R9, R10
2
100K
100k
R11, R12
2
1.5K
1.5k
R13, R14

ESP-Drone design files

The KiCad project lives in the Adi1011-Data/ESP-Drone repository on GitHub; these links point at the commit this page was built from.

ESP-Drone: common questions

How big is the ESP-Drone PCB?

The ESP-Drone measures 19.8 × 21.9 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the ESP-Drone?

41 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ESP-Drone design files?

From the Adi1011-Data/ESP-Drone repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ESP-Drone design in my own project?

The repository has no license, so all rights stay with Adi1011-Data. Use it as a reference, and ask the author before reusing the design.

Similar boards