Esp32 board

Adichidrawar·electronics-assessment-IF·esp32_board/esp32_board.kicad_pcb

Esp32 board layout, top view — open source ESP32 board by Adichidrawar

About the Esp32 board

Esp32 board is an open source ESP32 PCB design by Adichidrawar, published on GitHub. It is a 2-layer board measuring 50 × 35 mm, with 27 components from 18 distinct parts.

Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the CH340C and AMS1117-3.3. By type, the board carries 8 capacitors, 6 resistors, 3 ICs, 3 connectors, 3 diodes and 2 transistors.

It belongs with the sensors and iot & wireless designs in this gallery.

From the project

Hardware design solution for the Intelligence Factory Hardware/Mechatronics Engineer take-home assessment. Includes a two-board ESP32-based embedded system with a remote IMU sensor board, complete PCB design in KiCad, BOM with orderable parts, design documentation, and analog front-end analysis for a piezo contact microphone.

This repository contains two KiCad-based electronics design projects for an IMU and ESP32-based hardware assessment. The work is organized into two PCB design folders with schematic, layout, CSV data, and manufacturing output files.

The assessment includes: - An ESP32-oriented board design in the esp32project folder - A second IMU-focused board design in the imudesign folder - Generated Gerber files for fabrication review - Project metadata and design exports for documentation and handoff - The solution for Part 2 — Analog front end is provided in the PDF named Part 2 — Analog front end…

Main components on the Esp32 board

Esp32 board bill of materials (BOM)

27 components, 18 distinct parts.

QtyPartRefs
1
ESP32-WROOM-32
U1
1
CH340C
U2
1
AMS1117-3.3
U4
2
SS8050
Q1, Q3
1
USB_C_Receptacle_USB2.0_16P
J1
1
Conn_01x07
J2
1
Conn_01x05_Pin
J3
2
SW_Push
SW1, SW2
1
RED
D1
1
B5819W
D2
1
BLUE
D3
6
100nF
C1, C3, C4, C5, C6, C7
1
10uF/15V
C2
1
1uf
C8
1
5K1
R2
1
1K
R3
3
10K
R4, R5, R6
1
220R
R7

Esp32 board design files

The KiCad project lives in the Adichidrawar/electronics-assessment-IF repository on GitHub; these links point at the commit this page was built from.

Esp32 board: common questions

What microcontroller does the Esp32 board use?

The Esp32 board is built around the ESP32-WROOM-32, from the ESP32 family.

How big is the Esp32 board?

The Esp32 board measures 50 × 35 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Esp32 board?

27 components, from 18 distinct parts. The full bill of materials is listed on this page.

Where can I download the Esp32 board design files?

From the Adichidrawar/electronics-assessment-IF repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Esp32 board design in my own project?

The repository has no license, so all rights stay with Adichidrawar. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Esp32 board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in electronics-assessment-IF

Similar boards