HardLabs

OMEGA--1.2

adirock09·OMEGA--1.2·OMEGA (Custom Rp2040 Chip MicroPad)/PCB/Custom Rp2040 Micropad( Omega).kicad_pcb

OMEGA--1.2 PCB layout, top view — open source RP2040/RP2350 board by adirock09

About the OMEGA--1.2 PCB

OMEGA--1.2 is an open source RP2040/RP2350 PCB design by adirock09, published on GitHub. It is a 2-layer board measuring 58 × 74 mm, with 51 components from 18 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the MCP1700x-330xxTT and W25Q16JVUXIQ TR. By type, the board carries 17 capacitors, 11 switches, 10 diodes, 7 resistors, 3 ICs and 2 connectors.

It belongs with the keyboards and displays & leds designs in this gallery.

From the project

This is a Custom Rp2040 Chip Based MicroPad , It has 9 Switches , a roter encode and a oled screen . We used matrix for switches so it uses less gpio pins and it has 4 layers the rotor key is used to change the layers which is displaced on the screen so in total we have keys outp

This is a Custom Rp2040 Chip Based MicroPad , It has 9 Switches , a roter encode and a oled screen . We used matrix for switches so it uses less gpio pins and it has 4 layers the rotor key is used to change the layers which is displaced on the screen so in total we have keys output 9x4=36 + 4 outputs from rotor = 40 Outputs. ## Features

- Based on RP2040 Chip - Has total 40 Outputs ## Firmware - Firmware is based on QMK. ### Schematic

OMEGA--1.2, from the project README
From the project README

Main components on the OMEGA--1.2

RP2040MCP1700x-330xxTTW25Q16JVUXIQ TR

OMEGA--1.2 bill of materials (BOM)

51 components, 18 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RP2040
U1
1
MCP1700x-330xxTT
U2
1
W25Q16JVUXIQ TR
U4
1
12 MHz
Y1
1
USB_C_Receptacle_USB2.0_14P
J1
1
Conn_01x04_Pin
J2
1
SW_Push
SW1
1
RotaryEncoder_Switch_MP
SW2
9
SW_Push
SW4, SW5, SW6, SW7, SW8, SW9, SW13, SW14 +1
10
1N4148
D1, D4, D5, D6, D7, D8, D9, D10 +2
2
1uF
C1, C10
11
0.1uF
C2, C3, C4, C5, C6, C7, C8, C9 +3
2
10uF
C13, C14
2
33pF
C15, C16
2
5.1K
R1, R2
2
27
R3, R4
2
1K
R5, R6
1
10K
R7

OMEGA--1.2 design files

The KiCad project lives in the adirock09/OMEGA--1.2 repository on GitHub; these links point at the commit this page was built from.

OMEGA--1.2: common questions

What microcontroller does the OMEGA--1.2 use?

The OMEGA--1.2 is built around the RP2040, from the RP2040/RP2350 family.

How big is the OMEGA--1.2 PCB?

The OMEGA--1.2 measures 58 × 74 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the OMEGA--1.2?

51 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the OMEGA--1.2 design files?

From the adirock09/OMEGA--1.2 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the OMEGA--1.2 design in my own project?

The repository has no license, so all rights stay with adirock09. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the OMEGA--1.2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards