HardLabs

Picodvi

Adrian13985·PICO-MAC-feat-DVI·external/PicoDVI/hardware/board/picodvi.kicad_pcb

Picodvi PCB layout, top view — open source RP2040/RP2350 board by Adrian13985

About the Picodvi PCB

Picodvi is an open source RP2040/RP2350 PCB design by Adrian13985, published on GitHub. It is a 4-layer board measuring 50 × 30 mm, with 51 components from 18 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the NCP115ASN330 and W25Q16JV. By type, the board carries 20 resistors, 16 capacitors, 6 connectors, 3 ICs, 3 switches and 2 diodes.

From the project

This directory contains schematics and layout files

Main components on the Picodvi

RP2040NCP115ASN330W25Q16JV

Picodvi bill of materials (BOM)

51 components, 18 distinct parts.

QtyPartRefs
1
RP2040
U1
1
NCP115ASN330
U2
1
W25Q16JV
U3
1
12 M
Y1
1
USB_OTG
J1
1
Conn_01x05
J2
2
02x06
J3, J4
1
NOT_HDMI_A
J5
1
Conn_01x02
J6
3
SW_Push
SW1, SW2, SW3
2
LED
D1, D2
7
1u
C1, C3, C7, C11, C22, C23, C24
7
100n
C2, C4, C5, C6, C8, C9, C13
2
10p
C10, C12
8
2k2
R1, R3, R6, R7, R8, R9, R11, R20
1
DNF
R2
2
27R
R4, R5
9
270
R10, R12, R13, R14, R15, R16, R17, R18 +1

Picodvi design files

The KiCad project lives in the Adrian13985/PICO-MAC-feat-DVI repository on GitHub; these links point at the commit this page was built from.

Picodvi: common questions

What microcontroller does the Picodvi use?

The Picodvi is built around the RP2040, from the RP2040/RP2350 family.

How big is the Picodvi PCB?

The Picodvi measures 50 × 30 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Picodvi?

51 components, from 18 distinct parts. The full bill of materials is listed on this page.

Where can I download the Picodvi design files?

From the Adrian13985/PICO-MAC-feat-DVI repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Picodvi design in my own project?

The repository has no license, so all rights stay with Adrian13985. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Picodvi without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in PICO-MAC-feat-DVI

Similar boards