5 open source boards using the NCP115ASN330

Real designs built with the NCP115ASN330, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

The NCP115ASN330 in open source designs

The gallery holds 5 open source boards using the NCP115ASN330 from 5 GitHub repositories; a typical one measures about 50 × 30 mm and carries around 51 components.

80% use four copper layers or more, and 60% carry an open source license.

The most starred is Picodvi by Wren6991.

Parts used alongside the NCP115ASN330

Microcontrollers on boards using the NCP115ASN330

What boards using the NCP115ASN330 are built for

NCP115ASN330: common questions

Where can I find a NCP115ASN330 reference design?

Each of the 5 boards on this page is a real design using the NCP115ASN330. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the NCP115ASN330 use?

Most are built on RP2040/RP2350 (5).

How big is a typical board using the NCP115ASN330?

The median is 50 × 30 mm, and 20% are two-layer designs.

What is the most popular open source board using the NCP115ASN330?

By GitHub stars, Picodvi by Wren6991, with 1,509 stars.

Can I simulate one of these boards using the NCP115ASN330 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part