11 open source boards using the W25Q16JV
Real designs built with the W25Q16JV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Picodvi
Wren6991
50 × 30 mm51 parts4LBSD-3-Clause1.5kRP2040/RP2350
Riscboy
Wren6991
70.3 × 102.1 mm106 parts2LNo license511RP2040/RP2350
Hunter Cat NFC
ElectronicCats
80.7 × 33.5 mm79 parts2LGPL-3.0233RP2040/RP2350
Faultycat
ElectronicCats
51.2 × 124.2 mm94 parts2LBSD-3-Clause183RP2040/RP2350
Picodvi
RafaGS
50 × 30 mm51 parts4LMIT19- schematic only · 90 partsRP2040/RP2350
SCSIknifePocket
Siliconinsid
90 partsCERN-OHL-S-2.07 RP2040/RP2350
Bottom board palmtop
ZeroPhone
110 × 89 mm327 parts2LCERN-OHL-S-2.02RP2040/RP2350
Picodvi
Adrian13985
50 × 30 mm51 parts4LNo license0RP2040/RP2350
Rp2040
Gaitch
30 × 60 mm39 parts2LNo license0- schematic only · 31 partsRP2040/RP2350
Openrb pico hw
hazptr
31 partsNo license0 RP2040/RP2350
Chubby hat
cyber-murmel
143.5 × 91.4 mm95 parts2LMIT22
How designs wire the W25Q16JV
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the W25Q16JV connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 8 of 8 designs, most often 100 nF (then 1 µF).
- The CS pin has a pull-up to 3.3V on 7 of 8 designs, most often 10 kΩ.
- The CS pin has a series resistor on 6 of 8 designs, most often 2.2 kΩ (then 1 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CSpin 1 | Connected to: The microcontroller 100% |
|
| GNDpin 4 | Connected to: GND 100% | — |
| VCCpin 8 | Connected to: 3.3V 100% |
|
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Picodvi by Wren6991, Hunter Cat NFC by ElectronicCats, Faultycat by ElectronicCats and Chubby hat by cyber-murmel.
The W25Q16JV in open source designs
The gallery holds 11 open source boards using the W25Q16JV from 11 GitHub repositories; a typical one measures about 51.2 × 60 mm and carries around 79 components.
67% are two-layer designs, the rest use four layers or more, and 64% carry an open source license.
The most starred is Picodvi by Wren6991.
Parts used alongside the W25Q16JV
Microcontrollers on boards using the W25Q16JV
What boards using the W25Q16JV are built for
W25Q16JV: common questions
Where can I find a W25Q16JV reference design?
Each of the 11 boards on this page is a real design using the W25Q16JV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the W25Q16JV VCC pin?
The VCC pin has a decoupling capacitor on 8 of 8 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 8 open source designs using the W25Q16JV.
What pull-up resistor is used on the W25Q16JV CS pin?
The CS pin has a pull-up to 3.3V on 7 of 8 designs, most often 10 kΩ. Counted from the KiCad layouts of 8 open source designs using the W25Q16JV.
What parts are used alongside the W25Q16JV?
The RP2040, NCP115ASN330 and AP2112K-3.3 appear in the most repositories here.
Which microcontrollers do boards using the W25Q16JV use?
Most are built on RP2040/RP2350 (11).
How big is a typical board using the W25Q16JV?
The median is 51.2 × 60 mm, and 67% are two-layer designs.
What is the most popular open source board using the W25Q16JV?
By GitHub stars, Picodvi by Wren6991, with 1,509 stars.
Can I simulate one of these boards using the W25Q16JV before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.