Spotify display
adriel-babalola·spotify-display·spotify-display-kicad/spotify-display/spotify-display.kicad_sch

About the Spotify display PCB
Spotify display is an open source ESP32 PCB design by adriel-babalola, published on GitHub. It is a board, with 7 components from 5 distinct parts.
Its main chip is the ESP32-C3, from the ESP32 family. Other key parts include the TFT Display. By type, the board carries 3 switches, 2 ICs, 1 diode and 1 resistor.
It belongs with the displays & leds, keyboards and iot & wireless designs in this gallery.
From the project
my version of the spotify display starter project — shows whats currently playing and lets me skip/play songs with actual keyboard switches. also threw in a buzzer for button feedback cause why not.
my version of the spotify display starter project — shows whats currently playing and lets me skip/play songs with actual keyboard switches. also threw in a buzzer for button feedback cause why not.
i hate picking up my phone just to skip a song while im working or studying. wanted something that just sits on my desk, shows me whats playing, and lets me control it without touching my phone. also i wanted to finally learn how WiFi on a microcontroller works and this was the perfect excuse for that.
Main components on the Spotify display
Spotify display bill of materials (BOM)
7 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3 | MODULE_ESP32-C3_SUPERMINI_TH | U1 |
| 1 | TFT Display | MODULE_358 | U2 |
| 3 | SW_Push | SW1, SW2, SW3 | |
| 1 | Ring LED | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1 |
| 1 | 470 | R1 |
Spotify display design files
The KiCad project lives in the adriel-babalola/spotify-display repository on GitHub; these links point at the commit this page was built from.
Spotify display: common questions
What microcontroller does the Spotify display use?
The Spotify display is built around the ESP32-C3, from the ESP32 family.
How many components are on the Spotify display?
7 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Spotify display design files?
From the adriel-babalola/spotify-display repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.
Can I use the Spotify display design in my own project?
The repository has no license, so all rights stay with adriel-babalola. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Spotify display without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k