TPS62133
About the TPS62133 PCB
TPS62133 is an open source PCB design by adsehgal, published on GitHub. It is a 2-layer board measuring 43 × 21 mm, with 8 components from 8 distinct parts.
Other key parts include the LM2576_DB. By type, the board carries 4 capacitors, 1 IC, 1 inductor and 1 resistor.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
This repo collates my senior design project at UCSC.
SlugCharge was a student run project geared towards helping the homeless communit of Santa Cruz, CA. The project was led by four Electrical Engineering students at the University of California, Santa Cruz. The team aimed towards providing solar powered charging stations to the community so they can stay conencted with family and potential employers that may turn their life around!
Main components on the TPS62133
TPS62133 bill of materials (BOM)
8 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM2576_DB TPS62133 | VQFN-16-1EP_3x3mm_P0.5mm_EP1.68x1.68mm_ThermalVias | U1 |
| 1 | DB_42x21 | DB_43x21 | DB1 |
| 1 | 2.2µH | L_6.3x6.3_H3 | L1 |
| 1 | 100NF 100nF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1 |
| 1 | 100NF 620pF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2 |
| 1 | 100NF 10µF | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C3 |
| 1 | 100NF 22µF | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C4 |
| 1 | 100K | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
TPS62133 design files
The KiCad project lives in the adsehgal/SlugCharge repository on GitHub; these links point at the commit this page was built from.
TPS62133: common questions
How big is the TPS62133 PCB?
The TPS62133 measures 43 × 21 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TPS62133?
8 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the TPS62133 design files?
From the adsehgal/SlugCharge repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the TPS62133 design in my own project?
The repository has no license, so all rights stay with adsehgal. Use it as a reference, and ask the author before reusing the design.
More boards in SlugCharge
Similar boards
134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979