AeonLabs pcb template esp32-s3
About the AeonLabs pcb template esp32-s3
AeonLabs pcb template esp32-s3 is an open source ESP32 PCB design by aeonSolutions, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 86.9 × 88.5 mm, with 84 components from 57 distinct parts.
Its main chip is the ESP32-PSRAM_LY68L6400S, from the ESP32 family. Other key parts include the MCP1525-TT, ATSHA204A-MAHDA-T, Battery_charger_CN3065_QFN8, AHT20 and TEMT6000. By type, the board carries 5 ICs, 5 connectors and 1 LED.
From the project
PCB template ESP32 S3 with circuit schematic and KiCad project files
Main components on the AeonLabs pcb template esp32-s3
AeonLabs pcb template esp32-s3 bill of materials (BOM)
84 components, 57 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP1525-TT | SOT-23 | U1 |
| 1 | ATSHA204A-MAHDA-T | ATSHA204A Auth SOIC8 | U2 |
| 1 | Battery_charger_CN3065_QFN8 | QFN8 3.1x2.9mm QFNn-8 3x3 SON80P400X400X100-9N | U3 |
| 1 | AHT20 | AHT20 HT Sensor PSON100P300X300X110-6N | U4 |
| 1 | TEMT6000 | TEMT6000-SEN | U6 |
| 1 | 4.7uF | C_0805_2012Metric | CN3065_C2 |
| 1 | 1K8 | R_0603_1608Metric | CN3065_R1 |
| 1 | LED | LED_0805_2012Metric | CN3065_STDBY_LED1 |
| 1 | 22uF | C_0805_2012Metric | CN3965_C1 |
| 1 | TYPE-C-31-M-12 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 5 | 100nF | C_0603_1608Metric | ATSHA_C1, E_RTS_C1, E_VDDA_C1, VOLTAGE_REF_C1, VOLTAGE_REF_C2 |
| 1 | AUR9718x_DFN_3x3mm_6_pin | AUR9718 ST1S09 SON95P300X300X100-7N | AUR1 |
| 1 | 22uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | AUR_C1 |
| 1 | 4.7uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | AUR_C2 |
| 1 | 75k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | AUR_R1 |
| 1 | 24k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | AUR_R2 |
| 1 | 3.3uF | L_1210_3225Metric | AUR_l1 |
| 2 | Polyfuse | Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | BAT_FUSE1, PWR_FUSE1 |
| 3 | 100k | R_0603_1608Metric | BAT_SENSE_R1, BAT_SENSE_R2, PSRAM_R1 |
| 1 | 4k7 | R_0603_1608Metric | DIP_R1 |
Show 37 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1k | R_0603_1608Metric | DIP_R2 |
| 1 | 20k | R_0603_1608Metric | DIP_R3 |
| 1 | 200k | R_0603_1608Metric | DIP_R4 |
| 1 | 2M | R_0603_1608Metric | DIP_R5 |
| 1 | DMP1045U | SOT-23 | DMP1045U_1 |
| 8 | 10K | R_0603_1608Metric | DMP1045_R1, E_DTR_R1, E_RTS_R1, I2C_SCL_R1, I2C_SDA_R1, IMR1, IMR2, TMPR1 |
| 1 | D_Schottky | D_1206_3216Metric | DMP1045_SCHOT1 |
| 1 | ESP32-PSRAM_LY68L6400S | SOIC-8_3.9x4.9mm_P1.27mm | EPS1 |
| 1 | ESP32-S3 | QFN-56-1EP_7x7mm_P0.4mm_EP5.6x5.6mm | ESP32S1 |
| 1 | RFShield_OnePiece | ESP32-S3 GND Shield | ESP32_SHIELD1 |
| 1 | W25Q128JVS | WSON8 FLASH SPI SON127P800X600X80-9N | ESP_FLASH1 |
| 1 | AN9520 | 2.4ghZ WIFI ANTENNA AN9520_ANT2-SMD-9.5X2.1X1.0MM | E_LNA_ANT1 |
| 1 | U.FL-R-SMT(01) | RF Antenna IPEX SMD PCB HRS_U.FL-R-SMT(01) | E_LNA_ANT2 |
| 2 | 2.7pF | C_0603_1608Metric | E_LNA_C1, E_LNA_C2 |
| 1 | 1.8nH 5% | L_0805_2012Metric | E_LNA_l1 |
| 1 | 1uF 10% 50V | C_0603_1608Metric | E_SPI_C1 |
| 5 | 100nF 10% 16V | C_0603_1608Metric | E_SPI_C2, E_VDD_3_C3, E_VDD_3_C4, E_VDD_CPU_C1, E_VDD_RTC_C1 |
| 1 | 499R | R_0603_1608Metric | E_UART_TX_1 |
| 1 | 1uF 10% 50V | C_0805_2012Metric | E_VDDA_C2 |
| 2 | 10uF 20% 6.3V | C_0805_2012Metric | E_VDD_3_C1, E_VDD_3_C2 |
| 1 | 12nH 5% | L_0805_2012Metric | E_VDD_L1 |
| 1 | 32.768Mhz 22pF+-10PPM | Crystal_SMD_3225-4Pin_3.2x2.5mm | E_XTAL32_1 |
| 4 | 22pF 5% 50V | C_0603_1608Metric | E_XTAL32_C1, E_XTAL32_C2, E_XTAL40_C1, E_XTAL40_C2 |
| 1 | 40Mhz 22pF+-10PPM | Crystal_SMD_3225-4Pin_3.2x2.5mm | E_XTAL40_1 |
| 2 | Conn_01x03_Female | JST_SH_SM03B-SRSS-TB_1x03-1MP_P1.00mm_Horizontal | ExtSW1, ExtSWBAT_PLUG2 |
| 1 | HX4002 | HX4002 SOT95 P280X125-6N | HX1 |
| 3 | 2.2uF | C_0603_1608Metric | HX_C1, HX_C2, HX_C3 |
| 1 | I2C6 | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | I2C_PLUG1 |
| 1 | LSM6DS3 | LSM6DS3 Motion Sensor PQFN50P300X250X86-14N | IMU1 |
| 1 | Conn_01x07_Socket | JST_SH_SM07B-SRSS-TB_1x07-1MP_P1.00mm_Horizontal | JICSP1 |
| 1 | 330R | R_0603_1608Metric | LR1 |
| 1 | 10k | R_0805_2012Metric | MTRR1 |
| 1 | NPN | SOT-23 | MTRT1 |
| 1 | Screw_Terminal_01x02 | JST_SH_SM02B-SRSS-TB_1x02-1MP_P1.00mm_Horizontal | PWR_PLUG1 |
| 2 | 5k1 | R_0603_1608Metric | USB_PLUG_R1, USB_PLUG_R3 |
| 1 | 150K | R_0603_1608Metric | USB_PLYG_R2 |
| 1 | LED_GBRC | LED_1206_3210_RGB_Metric | LED1 |
AeonLabs pcb template esp32-s3 design files
The KiCad project lives in the aeonSolutions/AeonLabs-pcb-template-esp32-s3 repository on GitHub; these links point at the commit this page was built from.
AeonLabs pcb template esp32-s3: common questions
What microcontroller does the AeonLabs pcb template esp32-s3 use?
The AeonLabs pcb template esp32-s3 is built around the ESP32-PSRAM_LY68L6400S, from the ESP32 family.
How big is the AeonLabs pcb template esp32-s3?
The AeonLabs pcb template esp32-s3 measures 86.9 × 88.5 mm, has 2 copper layers and is 1.67 mm thick.
How many components are on the AeonLabs pcb template esp32-s3?
84 components, from 57 distinct parts. The full bill of materials is listed on this page.
Where can I download the AeonLabs pcb template esp32-s3 design files?
From the aeonSolutions/AeonLabs-pcb-template-esp32-s3 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the AeonLabs pcb template esp32-s3 design in my own project?
Yes, under the terms of its CC0-1.0 license, which aeonSolutions chose for the repository.
Can I test firmware for the AeonLabs pcb template esp32-s3 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Esp32 minimal
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k
ESP32Controller
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4k