7 open source boards using the ATSHA204A-MAHDA-T

Real designs built with the ATSHA204A-MAHDA-T, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the ATSHA204A-MAHDA-T

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the ATSHA204A-MAHDA-T connects to, and the resistors, capacitors and other passives placed on it.

  • The SDA pin has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ (then 500 Ω).
  • The SCL pin has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ (then 500 Ω).
  • The VCC pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF.
  • The EXP pin is left unconnected on 3 of 4 designs.
NCpin 1, 2, 3, 7Connected to: Not connected 100%
GNDpin 4Connected to: GND 100%
SDApin 5Connected to: AHT20 80%, a connector 40%, ADS1115 40%
  • Pull-up to 3.3V on 100% · 10 kΩ (4), 500 Ω (1), 5.1 kΩ (1)
SCLpin 6Connected to: AHT20 80%, a connector 40%, ADS1115 40%
  • Pull-up to 3.3V on 100% · 10 kΩ (4), 500 Ω (1), 5.1 kΩ (1)
VCCpin 8Connected to: 3.3V 100%
  • Decoupling capacitor on 80% · 100 nF (6)
EXPpin 9Connected to: Not connected 75% · GND 25%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include CEM by aeonSolutions, AeonLabs pcb template esp32-s3 by aeonSolutions, HEXBERRY-V-20Q100-0.91 by logitiles and Aeonlabs-Home-Automation-Smart-EMF-Shield-Curtain for-Windows and-Balconies by aeonSolutions.

The ATSHA204A-MAHDA-T in open source designs

The gallery holds 7 open source boards using the ATSHA204A-MAHDA-T from 5 GitHub repositories; a typical one measures about 86.9 × 88.5 mm and carries around 186 components.

86% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is OPEN ECU by aeonSolutions.

Parts used alongside the ATSHA204A-MAHDA-T

Microcontrollers on boards using the ATSHA204A-MAHDA-T

What boards using the ATSHA204A-MAHDA-T are built for

ATSHA204A-MAHDA-T: common questions

Where can I find a ATSHA204A-MAHDA-T reference design?

Each of the 7 boards on this page is a real design using the ATSHA204A-MAHDA-T. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the ATSHA204A-MAHDA-T SDA pin?

The SDA pin has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ (then 500 Ω). Counted from the KiCad layouts of 5 open source designs using the ATSHA204A-MAHDA-T.

What pull-up resistor is used on the ATSHA204A-MAHDA-T SCL pin?

The SCL pin has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ (then 500 Ω). Counted from the KiCad layouts of 5 open source designs using the ATSHA204A-MAHDA-T.

What decoupling capacitors do designs use on the ATSHA204A-MAHDA-T VCC pin?

The VCC pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the ATSHA204A-MAHDA-T.

Which microcontrollers do boards using the ATSHA204A-MAHDA-T use?

Most are built on ESP32 (6).

How big is a typical board using the ATSHA204A-MAHDA-T?

The median is 86.9 × 88.5 mm, and 86% are two-layer designs.

What is the most popular open source board using the ATSHA204A-MAHDA-T?

By GitHub stars, OPEN ECU by aeonSolutions, with 160 stars.

Can I simulate one of these boards using the ATSHA204A-MAHDA-T before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part