30 open source boards using the AHT20
Real designs built with the AHT20, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
OPEN ECU
aeonSolutions
168.9 × 123.3 mm282 parts2LCC0-1.0160RP2040/RP2350
XSense
lithiumice
30.8 × 46.9 mm74 parts4LNo license92ESP32
AeonLabs pcb template esp32-s3
aeonSolutions
86.9 × 88.5 mm84 parts2LCC0-1.025STM32
LoRa-STM32WL-DevKit
OLIMEX
58.4 × 55.9 mm58 parts2LGPL-3.020ESP32
Moskill
telagod
30 × 100 mm90 parts2LNo license2Tinynode
Stary2001
80 × 60 mm63 parts4LCERN-OHL-P-2.02ESP32
Thermostat
jrtaylor71
101.5 × 83.4 mm62 parts4LNo license1ESP32
Aeonlabs-Home-Automation-Smart-EMF-Shield-Curtain for-Windows and-Balconies
aeonSolutions
59.6 × 23.5 mm57 parts2LCC0-1.01ESP32
Environment-Monitor
Dynix7
59.5 × 40 mm49 parts2LMIT1ESP32
Solar Project Rev1
Phil-CIA
100 × 99.9 mm171 parts4LNo license0ESP32
AeonLabs-HomeAutomation-Bed-Sheet-EMF-Protection for-Better-Health-Sleep
aeonSolutions
59.6 × 23.5 mm57 parts2LCC0-1.00Xinghongpai nearlink dev board
HuaqiuOpenHardware
96 × 70 mm49 parts2LCustom license0ESP32
Esp32-IoT
F45c
51.8 × 49 mm47 parts2LNo license0ESP32
LD2024 ESP32 Radar
Jack05325
98 × 28 mm42 parts2LNo license0STM32
Transmitter
rjacoby00
44.6 × 31.8 mm37 parts4LNo license0ESP32
Room
Jerzeek
50 × 55 mm24 parts2LCERN-OHL-S-2.00ESP32
CEM
aeonSolutions
178.5 × 91.2 mm196 parts2LCC0-1.0160ESP32
Moskill backup
telagod
30 × 100 mm90 parts2LNo license2ESP32
Thermostat (Before routing)
jrtaylor71
105.5 × 82.4 mm53 parts4LNo license1ESP32
Solar Project Rev0 - Manufactured First Build
Phil-CIA
100 × 99.9 mm157 parts4LNo license0Alarm btn
Carabouille
100 × 100 mm35 parts2LNo license0MPCIe Sens
Hopichek
60.7 × 44.7 mm26 parts2LNo license0ESP32
REM
aeonSolutions
178.5 × 91.2 mm196 parts2LCC0-1.0160ESP32
Moskill routed
telagod
30 × 100 mm90 parts2LNo license2ESP32
Solar Project Rev1 - 2026-07-27 PCB Baseline
Phil-CIA
100 × 99.9 mm157 parts4LNo license0ESP32
ESP32 S3 PCB TEMPLATE
rompasaurus
86.9 × 88.5 mm84 parts2LNo license2Ebyte e22p-30-zero
Stary2001
65 × 31.5 mm15 parts4LCERN-OHL-P-2.02ESP32
Solar Project PreRoute save
Phil-CIA
100 × 100 mm155 parts2LNo license0ESP32
SensactUp4
klaus-liebler
70 × 70 mm145 parts2LApache-2.04Adafruit AHT20 Temperature & Humidity
humancomputerintegration
25.4 × 17.8 mm13 parts2LGPL-3.03
How designs wire the AHT20
Read from the KiCad layouts of 21 open source designs, one per repository: what each pin of the AHT20 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 16 of 21 designs, most often 100 nF (then 10 µF).
- The SDA pin has a pull-up to 3.3V on 15 of 21 designs, most often 10 kΩ (then 4.7 kΩ).
- The SCL pin has a pull-up to 3.3V on 14 of 21 designs, most often 10 kΩ (then 500 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| NCpin 1, 6 | Connected to: Not connected 98% | — |
| VDDpin 2 | Connected to: 3.3V 67% · a signal 33% |
|
| SCLpin 3 | Connected to: The microcontroller 43%, a connector 38% |
|
| SDApin 4 | Connected to: The microcontroller 48%, a connector 38% |
|
| GNDpin 5 | Connected to: GND 95% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include CEM by aeonSolutions, XSense by lithiumice, AeonLabs pcb template esp32-s3 by aeonSolutions and LoRa-STM32WL-DevKit by OLIMEX.
The AHT20 in open source designs
The gallery holds 30 open source boards using the AHT20 from 21 GitHub repositories; a typical one measures about 75 × 76.2 mm and carries around 63 components.
70% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.
The most starred is OPEN ECU by aeonSolutions.
Parts used alongside the AHT20
Microcontrollers on boards using the AHT20
What boards using the AHT20 are built for
AHT20: common questions
Where can I find a AHT20 reference design?
Each of the 30 boards on this page is a real design using the AHT20. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the AHT20 VDD pin?
The VDD pin has a decoupling capacitor on 16 of 21 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 21 open source designs using the AHT20.
What pull-up resistor is used on the AHT20 SDA pin?
The SDA pin has a pull-up to 3.3V on 15 of 21 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 21 open source designs using the AHT20.
What pull-up resistor is used on the AHT20 SCL pin?
The SCL pin has a pull-up to 3.3V on 14 of 21 designs, most often 10 kΩ (then 500 Ω). Counted from the KiCad layouts of 21 open source designs using the AHT20.
What parts are used alongside the AHT20?
The AMS1117-3.3, ATSHA204A-MAHDA-T, BMP280, ADS1115 and CH340N appear in the most repositories here.
Which microcontrollers do boards using the AHT20 use?
Most are built on ESP32 (21), STM32 (2) and RP2040/RP2350 (1).
How big is a typical board using the AHT20?
The median is 75 × 76.2 mm, and 70% are two-layer designs.
What is the most popular open source board using the AHT20?
By GitHub stars, OPEN ECU by aeonSolutions, with 160 stars.
Can I simulate one of these boards using the AHT20 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.