Batteryboard bottom
AFS-pt·PROMETHEUS-1·2.Satellite/1.Hardware/Boards/avionics-batteryboard/batteryboard-bottom/batteryboard-bottom.kicad_pcb
About the Batteryboard bottom PCB
Batteryboard bottom is an open source PCB design by AFS-pt, published on GitHub. It is a 2-layer board measuring 45.6 × 45.6 mm, with 23 components from 13 distinct parts.
Other key parts include the INA219BIDR. By type, the board carries 13 resistors, 4 transistors, 3 capacitors, 2 connectors and 1 IC.
It belongs with the power & battery designs in this gallery.
From the project
Documentation lives here: https://afs-pt.github.io/PROMETHEUS-1
Main components on the Batteryboard bottom
Batteryboard bottom bill of materials (BOM)
23 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | INA219BIDR INA219BxD | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 2 | NX3008NBKS | SOT-363_SC-70-6 | Q1, Q3 |
| 2 | MBT2222ADW1T1G MBT2222ADW1T1 | SOT-363_SC-70-6 | Q2, Q4 |
| 1 | SFC-110-T2-F-D-A SFC-110-T2-X-D-A | SAMTEC_SFC-110-T2-X-D-A | J1 |
| 1 | FTS-107-01-L-DV-A FTS-107-01-X-DV-A | SAMTEC-FTS-107-01-X-DV-A | J2 |
| 2 | 06031C103K4T4A 10nF | C_0603_1608Metric | C1, C2 |
| 1 | 06035C104K4T2A 0.1uF | C_0603_1608Metric | C3 |
| 1 | CSM2512FT40L0 0.04R | R_2512_CurrentSense | R1 |
| 2 | RMCF0603FT680R 680R | R_0603_1608Metric | R2, R7 |
| 2 | RNCF0603DTE100K 100K | R_0603_1608Metric | R3, R8 |
| 4 | RNCF0603BTE10K0 10K | R_0603_1608Metric | R4, R5, R9, R10 |
| 2 | RMCF0603FT200K 200K | R_0603_1608Metric | R6, R11 |
| 2 | RMCF0603ZT0R00 DNI (0R) | R_0603_1608Metric | R12, R13 |
Batteryboard bottom design files
The KiCad project lives in the AFS-pt/PROMETHEUS-1 repository on GitHub; these links point at the commit this page was built from.
Batteryboard bottom: common questions
How big is the Batteryboard bottom PCB?
The Batteryboard bottom measures 45.6 × 45.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Batteryboard bottom?
23 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Batteryboard bottom design files?
From the AFS-pt/PROMETHEUS-1 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Batteryboard bottom design in my own project?
The repository has no license, so all rights stay with AFS-pt. Use it as a reference, and ask the author before reusing the design.
More boards in PROMETHEUS-1
Microchip SAM
Mainboard
AFS-pt
46.1 × 45.6 mm191 parts4LNo license15STM32
Cameraboard
AFS-pt
46.1 × 45.6 mm77 parts4LNo license15Solar-Panel-Y+
AFS-pt
50 × 50 mm65 parts4LNo license15AVR/Arduino
SatNOGS Rotator Controller v2.4
AFS-pt
100 × 80 mm65 parts2LNo license15Solar-Panel-X-
AFS-pt
48.4 × 48.4 mm65 parts4LNo license15Solar-Panel-Z+
AFS-pt
48.4 × 48.4 mm63 parts4LNo license15Raspberry Pi
PROMETHEUS-1 Ground Station
AFS-pt
65 × 45 mm26 parts2LNo license15
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k