Hivemind
agenticaiuw·hivemind·hardware/kicad/KiCad.kicad_pcb
About the Hivemind PCB
Hivemind is an open source PCB design by agenticaiuw, published on GitHub. It is a 2-layer board measuring 30.2 × 33.7 mm, with 29 components from 22 distinct parts.
Other key parts include the Icarus_SoM_nRF9160, MCP73831, AP2112_3V3, XC6206_1V8 and MAX98357A. By type, the board carries 10 capacitors, 7 ICs, 5 resistors, 1 module, 1 connector and 1 battery holder.
It belongs with the audio designs in this gallery.
From the project
Unified monorepo for the Agentic Gadget hardware, firmware, local agent, cloud relay, and Bluetooth audio bridge.
Unified monorepo for the Agentic Gadget hardware, firmware, local agent, cloud relay, and Bluetooth audio bridge.
- firmware/nrf9160 — nRF9160 DK firmware (Zephyr/NCS) - firmware/esp32-airpods-bridge — HUZZAH32 Bluetooth A2DP audio bridge - software/ai-pendant-simulator — local Mac agent, cloud relay, and simulator - software/dashboard-sveltekit — Mission Control dashboard (Cloudflare Worker) - hardware — datasheets, electrical design, and KiCad sources - docs — build guides and architecture notes
Main components on the Hivemind
Hivemind bill of materials (BOM)
29 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Icarus_SoM_nRF9160 | Icarus_SoM | U1 |
| 1 | MCP73831 | SOT-23-5 | U2 |
| 1 | AP2112_3V3 | SOT-23-5 | U3 |
| 1 | XC6206_1V8 | SOT-23-3 | U4 |
| 1 | MAX98357A | QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm | U5 |
| 1 | TXB0102 | VSSOP-8_2.3x2mm_P0.5mm | U6 |
| 1 | DRV2605L | MSOP-10_3x3mm_P0.5mm | U7 |
| 1 | LRA_VLV101040A | PinHeader_1x02_P2.54mm_Vertical | M1 |
| 1 | USB4085_USB_C | USB4085-GF-A | J1 |
| 1 | LiPo_3V7 | JST_PH_S2B | BT1 |
| 1 | Speaker_8ohm | PinHeader_1x02_P2.54mm_Vertical | LS1 |
| 1 | T5837_PDM_mic | T5837 | MK1 |
| 1 | Button_B3F | SW_PUSH_6mm | SW1 |
| 1 | SK6812 | SK6812 | D1 |
| 2 | 4.7uF | C_0402_1005Metric | C1, C2 |
| 1 | 100uF | C_0402_1005Metric | C3 |
| 1 | 10uF | C_0402_1005Metric | C4 |
| 4 | 1uF | C_0402_1005Metric | C5, C6, C8, C9 |
| 2 | 0.1uF | C_0402_1005Metric | C7, C10 |
| 2 | 5.1k | R_0402_1005Metric | R1, R2 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 2k | R_0402_1005Metric | R3 |
| 2 | 4.7k | R_0402_1005Metric | R4, R5 |
Hivemind design files
The KiCad project lives in the agenticaiuw/hivemind repository on GitHub; these links point at the commit this page was built from.
Hivemind: common questions
How big is the Hivemind PCB?
The Hivemind measures 30.2 × 33.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hivemind?
29 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Hivemind design files?
From the agenticaiuw/hivemind repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Hivemind design in my own project?
The repository has no license, so all rights stay with agenticaiuw. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687