--MagneticField---Acceleration-Sensors
ahoang205·--MagneticField---Acceleration-Sensors·hardware/kicad/Low-Power Instrument.kicad_pcb
About the --MagneticField---Acceleration-Sensors PCB
--MagneticField---Acceleration-Sensors is an open source STM32 PCB design by ahoang205, published on GitHub under the MIT license. It is a 2-layer board measuring 76.1 × 74.9 mm, with 92 components from 33 distinct parts.
Its main chip is the STM32L476RGTX, from the STM32 family. Other key parts include the TPS61022, TPS63900, ASM330LHHTR and MMC5983MA. By type, the board carries 35 capacitors, 29 resistors, 8 transistors, 6 ICs, 6 connectors and 3 inductors.
It belongs with the sensors, iot & wireless and test & measurement designs in this gallery.
From the project
Dự án thiết kế hệ thống phần cứng và phần mềm nhúng (Embedded IoT System) công suất thấp dùng để đo đạc, thu thập dữ liệu Từ Trường 3 Trục và Gia Tốc / Góc Quay 6 Trục, truyền dữ liệu đo từ xa qua mạng không dây Wi-Fi Telemetry về máy chủ giám sát.
Dự án thiết kế hệ thống phần cứng và phần mềm nhúng (Embedded IoT System) công suất thấp dùng để đo đạc, thu thập dữ liệu Từ Trường 3 Trục và Gia Tốc / Góc Quay 6 Trục, truyền dữ liệu đo từ xa qua mạng không dây Wi-Fi Telemetry về máy chủ giám sát.
- Cảm Biến Từ Trường Độ Chính Xác Cao: Tích hợp chip MMC5983MA (3-Axis Magnetometer) đo từ trường trái đất và phát hiện các biến đổi từ tính nhạy bén. - Cảm Biến Gia Tốc & Góc Quay Chuẩn Ô Tô: Tích hợp IMU 6 trục ASM330LHHTR (Automotive Grade 6-axis IMU) đo gia tốc tuyến tính và vận tốc góc cực kỳ ổn định. - Khóa Mạch Công Suất Thấp (Low-Power…
Main components on the --MagneticField---Acceleration-Sensors
--MagneticField---Acceleration-Sensors bill of materials (BOM)
92 components, 33 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS61022 | Texas_RWU0007A_VQFN-7_2x2mm_P0.5mm | U1 |
| 1 | TPS63900 | WSON-10-1EP_2.5x2.5mm_P0.5mm_EP1.2x2mm_ThermalVias | U2 |
| 1 | ASM330LHHTR | LGA-14L_2P5X3X0P83_STM | U3 |
| 2 | MMC5983MA | MMC5983MA_MEM | U4, U5 |
| 1 | STM32L476RGTX STM32L476RGTx | LQFP-64_10x10mm_P0.5mm | U6 |
| 4 | DON60P03 | PQFN-8-EP_6x5mm_P1.27mm_Generic | Q1, Q2, Q5, Q7 |
| 4 | AO3400 | SOT-23 | Q3, Q4, Q6, Q8 |
| 1 | 8MHZ 8Mhz | Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm | Y1 |
| 1 | 32KHZ 32kHz | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 3 | POWER | JST_VH_B2P-VH_1x02_P3.96mm_Vertical | J1, J2, J3 |
| 1 | UART | JST_VH_B4P-VH-B_1x04_P3.96mm_Vertical | J4 |
| 1 | DEBUG | PinHeader_2x03_P2.54mm_Vertical | J5 |
| 1 | ADC | JST_VH_B3P-VH-B_1x03_P3.96mm_Vertical | J6 |
| 2 | SW_Push | SW_SPST_B3U-1000P | SW1, SW2 |
| 1 | Diode | D_0805_2012Metric | D1 |
| 1 | Ferrite Bead | L_0603_1608Metric | FB1 |
| 1 | 1UH 1uH | L_APV_ANR4020 | L1 |
| 1 | 2.2UH 2.2uH | L_APV_ANR4020 | L2 |
| 9 | 22UF 22uF | C_0805_2012Metric | C1, C2, C3, C4, C5, C7, C8, C9 +1 |
| 17 | 100NF 100nF | C_0603_1608Metric | C6, C11, C12, C14, C16, C17, C18, C20 +9 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 1UF 1uF | C_0603_1608Metric | C13, C19, C22, C28 |
| 2 | 10UF 10uF | C_0603_1608Metric | C15, C24 |
| 1 | 5F | CHP5R5L505R-TWV | C23 |
| 2 | 12.5PF 12.5pF | C_0603_1608Metric | C25, C29 |
| 1 | 100K | R_0805_2012Metric | R1 |
| 10 | 100K | R_0603_1608Metric | R2, R5, R7, R8, R10, R19, R21, R22 +2 |
| 1 | 732K | R_0603_1608Metric | R3 |
| 4 | 10K | R_0603_1608Metric | R4, R6, R18, R27 |
| 2 | 36.5K | R_0603_1608Metric | R9, R20 |
| 6 | 4.7K | R_0603_1608Metric | R11, R12, R13, R15, R16, R17 |
| 1 | 1.15K | R_0603_1608Metric | R14 |
| 2 | 200K | R_0603_1608Metric | R24, R28 |
| 2 | 100R | R_2512_6332Metric | R25, R26 |
--MagneticField---Acceleration-Sensors design files
The KiCad project lives in the ahoang205/--MagneticField---Acceleration-Sensors repository on GitHub; these links point at the commit this page was built from.
--MagneticField---Acceleration-Sensors: common questions
What microcontroller does the --MagneticField---Acceleration-Sensors use?
The --MagneticField---Acceleration-Sensors is built around the STM32L476RGTX, from the STM32 family.
How big is the --MagneticField---Acceleration-Sensors PCB?
The --MagneticField---Acceleration-Sensors measures 76.1 × 74.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the --MagneticField---Acceleration-Sensors?
92 components, from 33 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the --MagneticField---Acceleration-Sensors design files?
From the ahoang205/--MagneticField---Acceleration-Sensors repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the --MagneticField---Acceleration-Sensors design in my own project?
Yes, under the terms of its MIT license, which ahoang205 chose for the repository.
Can I test firmware for the --MagneticField---Acceleration-Sensors without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k