10 open source boards using the TPS63900

Real designs built with the TPS63900, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

How designs wire the TPS63900

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the TPS63900 connects to, and the resistors, capacitors and other passives placed on it.

  • The VOUT pin has a decoupling capacitor on 8 of 8 designs, most often 22 µF (then 2.2 µF).
  • The LX2 pin has a inductor on 8 of 8 designs, most often 2.2 µH.
  • The LX1 pin has a inductor on 8 of 8 designs, most often 2.2 µH.
  • The VIN pin has a capacitor to GND on 8 of 8 designs, most often 22 µF (then 4.7 µF).
ENpin 1Connected to: Signal 75% · VBATT 25%
  • Capacitor to GND on 75% · 22 µF (5), 4.7 µF (3), 10 µF (3)
SELpin 2Connected to: Signal 50% · GND 38%
  • Capacitor to GND on 50% · 22 µF (5), 4.7 µF (2), 100 nF (1)
CFG1pin 3Connected to: Signal 88%
  • Resistor to GND on 88% · 36.5 kΩ (7)
CFG2pin 4Connected to: GND 50% · a signal 50%
  • Resistor to GND on 50% · 16.2 kΩ (1), 0 Ω (1), 1.15 kΩ (1)
CFG3pin 5Connected to: GND 50% · a signal 50%
  • Resistor to GND on 50% · 16.2 kΩ (2), 0 Ω (1), 36.5 kΩ (1)
VOUTpin 6Connected to: 3.3V 75% · a signal 25%
  • Decoupling capacitor on 100% · 22 µF (8), 2.2 µF (1), 100 nF (1)
LX2pin 7Connected to: Signal 100%
  • Inductor on 100% · 2.2 µH (8)
GNDpin 8, 11Connected to: GND 100%
LX1pin 9Connected to: Signal 100%
  • Inductor on 100% · 2.2 µH (8)
VINpin 10Connected to: Signal 63% · VBATT 38%
  • Capacitor to GND on 100% · 22 µF (5), 4.7 µF (4), 10 µF (4)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESP32S2 Breakout by gregdavill, Sisu SSE-9 by briskspirit, ARGOS DEMO by CNES and CFWatch by Dragon863.

The TPS63900 in open source designs

The gallery holds 10 open source boards using the TPS63900 from 8 GitHub repositories; a typical one measures about 60.2 × 56.6 mm and carries around 66 components.

60% use four copper layers or more, and 40% carry an open source license.

The most starred is Esp32s2-co2-monitor by gregdavill.

Microcontrollers on boards using the TPS63900

TPS63900: common questions

Where can I find a TPS63900 reference design?

Each of the 10 boards on this page is a real design using the TPS63900. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TPS63900 VOUT pin?

The VOUT pin has a decoupling capacitor on 8 of 8 designs, most often 22 µF (then 2.2 µF). Counted from the KiCad layouts of 8 open source designs using the TPS63900.

How is the TPS63900 LX2 pin connected?

The LX2 pin has a inductor on 8 of 8 designs, most often 2.2 µH. Counted from the KiCad layouts of 8 open source designs using the TPS63900.

How is the TPS63900 LX1 pin connected?

The LX1 pin has a inductor on 8 of 8 designs, most often 2.2 µH. Counted from the KiCad layouts of 8 open source designs using the TPS63900.

Which microcontrollers do boards using the TPS63900 use?

Most are built on ESP32 (2), STM32 (2), Nordic nRF (1) and Microchip SAM (1).

How big is a typical board using the TPS63900?

The median is 60.2 × 56.6 mm, and 40% are two-layer designs.

What is the most popular open source board using the TPS63900?

By GitHub stars, Esp32s2-co2-monitor by gregdavill, with 178 stars.

Can I simulate one of these boards using the TPS63900 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part