5 open source boards using the ASM330LHHTR
Real designs built with the ASM330LHHTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Pdms
PGRacing
102.5 × 113.8 mm473 parts4LNo license1ESP32
ESP-32 Based Avionics and Telemetry Board
devjamescollier
50 × 80 mm95 parts4LCERN-OHL-P-2.00ESP32
ESP-32 Based Avionics Telemetry Board
devjamescollier
50 × 80 mm95 parts4LCERN-OHL-P-2.00STM32
--MagneticField---Acceleration-Sensors
ahoang205
76.1 × 74.9 mm92 parts2LMIT0VCAT-TelemetryLeaderInterface
lhr-solar
74 × 75.2 mm62 parts2LCustom license0
How designs wire the ASM330LHHTR
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the ASM330LHHTR connects to, and the resistors, capacitors and other passives placed on it.
- The VDD_IO pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 µF).
- The VDD pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 nF).
- The RES pins is tied to GND on 100% of them.
- The CS pin has a pull-up to 3.3V on 2 of 5 designs, most often 10 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| RESpin 2, 3 | Connected to: GND 100% | — |
| VDD_IOpin 5 | Connected to: 3.3V 100% |
|
| GNDpin 6, 7 | Connected to: GND 100% | — |
| VDDpin 8 | Connected to: 3.3V 100% |
|
| NCpin 10, 11 | Connected to: Not connected 100% | — |
| CSpin 12 | Connected to: The microcontroller 60% · 3.3V 20% |
|
| SCLpin 13 | Connected to: The microcontroller 80% |
|
| SDApin 14 | Connected to: The microcontroller 80% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pdms by PGRacing, --MagneticField---Acceleration-Sensors by ahoang205, ESP-32 Based Avionics and Telemetry Board by devjamescollier and ESP-32 Based Avionics Telemetry Board by devjamescollier.
The ASM330LHHTR in open source designs
The gallery holds 5 open source boards using the ASM330LHHTR from 5 GitHub repositories; a typical one measures about 73.9 × 80 mm and carries around 95 components.
60% use four copper layers or more, and 60% carry an open source license.
The most starred is Pdms by PGRacing.
Parts used alongside the ASM330LHHTR
What boards using the ASM330LHHTR are built for
ASM330LHHTR: common questions
Where can I find a ASM330LHHTR reference design?
Each of the 5 boards on this page is a real design using the ASM330LHHTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the ASM330LHHTR VDD_IO pin?
The VDD_IO pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the ASM330LHHTR.
What decoupling capacitors do designs use on the ASM330LHHTR VDD pin?
The VDD pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 5 open source designs using the ASM330LHHTR.
How is the ASM330LHHTR RES pin connected?
The RES pins is tied to GND on 100% of them. Counted from the KiCad layouts of 5 open source designs using the ASM330LHHTR.
What parts are used alongside the ASM330LHHTR?
The USBLC6-2SC6, AP63203WU-7, CP2102N-A02-GQFN28, ESP32-WROOM-32E-N4 and LIS3MDLTR appear in the most repositories here.
Which microcontrollers do boards using the ASM330LHHTR use?
Most are built on ESP32 (2) and STM32 (2).
How big is a typical board using the ASM330LHHTR?
The median is 73.9 × 80 mm, and 40% are two-layer designs.
What is the most popular open source board using the ASM330LHHTR?
By GitHub stars, Pdms by PGRacing, with 1 stars.
Can I simulate one of these boards using the ASM330LHHTR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.