VVDAP
ai03-2725·VVDAP
About the VVDAP PCB
VVDAP is an open source RISC-V PCB design by ai03-2725, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 30 × 41.5 mm, with 53 components from 24 distinct parts.
Its main chip is the CH32V203F6P6, from the RISC-V family. Other key parts include the TPD4E05U06DQA, SN74LVC1G07DBVR, XC6206P332MR, SN74LVC1G66DBVR and MIE1W0505. By type, the board carries 20 capacitors, 12 ICs, 11 resistors, 4 diodes, 3 connectors and 2 switches.
It belongs with the usb & debug tools designs in this gallery.
From the project
Variable voltage isolated DAPLink programmer
Warning: Currently untested. If testing, proceed at your own risk.

Main components on the VVDAP
VVDAP bill of materials (BOM)
53 components, 24 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH32V203F6P6 | TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 3 | TPD4E05U06DQA | USON-10_2.5x1.0mm_P0.5mm | U3, U4, U8 |
| 2 | SN74LVC1G07DBVR | SOT-23-5 | U5, U7 |
| 1 | XC6206P332MR XC6206PxxxMR | SOT-23-3 | U6 |
| 2 | SN74LVC1G66DBVR | SOT-23-5 | U9, U10 |
| 1 | MIE1W0505 | MIE1W0505 | U11 |
| 1 | ADUM162N1BRZ ADuM162N1BRZ | SOIC-16_3.9x9.9mm_P1.27mm | U12 |
| 1 | TPS7B4250 | SOT-23-5 | U13 |
| 1 | FTSH-105-01-L-DV-K | FTSH-105-01-L-DV-K | J1 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J2 |
| 1 | Conn_01x04_MountingPin | PogoReceiver-2.54-4 | J3 |
| 1 | Polyfuse | Fuse_1206_3216Metric | F1 |
| 2 | SW_Push | SW_SPST_TS-1088-xR020 | SW1, SW2 |
| 1 | LED-Red | LED_0603_1608Metric | D1 |
| 1 | LED-Green | LED_0603_1608Metric | D2 |
| 2 | ESD5Z5V0 | D_SOD-523 | D3, D4 |
| 12 | 0.1UF 0.1uF | C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C11 +4 |
| 6 | 1UF 1uF | C_0603_1608Metric | C8, C9, C10, C15, C16, C18 |
| 1 | 10UF 10uF | C_0603_1608Metric | C13 |
| 1 | 22UF 22uF | C_1206_3216Metric | C14 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 10K 10k | R_0603_1608Metric | R1, R2 |
| 6 | 1k | R_0603_1608Metric | R3, R4, R7, R8, R9, R10 |
| 2 | 5.1K 5.1k | R_0603_1608Metric | R5, R6 |
| 1 | 1M | R_0603_1608Metric | R11 |
VVDAP design files
The KiCad project lives in the ai03-2725/VVDAP repository on GitHub; these links point at the commit this page was built from.
- LayoutVVDAP.kicad_pcb
- SchematicVVDAP.kicad_sch
- BOMProduction/VVDAP-R1.2-BOM.csv
VVDAP: common questions
What microcontroller does the VVDAP use?
The VVDAP is built around the CH32V203F6P6, from the RISC-V family.
How big is the VVDAP PCB?
The VVDAP measures 30 × 41.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the VVDAP?
53 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the VVDAP design files?
From the ai03-2725/VVDAP repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the VVDAP design in my own project?
Yes, under the terms of its GPL-3.0 license, which ai03-2725 chose for the repository.
Can I test firmware for the VVDAP without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.
Similar boards
RISC-V
Audio
byrantech
27.8 × 22.3 mm38 parts2LMIT4.3kRISC-V
Keybit
notaroomba
19.1 × 19.1 mm19 parts2LNo license438RISC-V
Workbench-1 Controller
Quchaosheng
160 × 130 mm106 parts8LApache-2.0212RISC-V
Froggyswadge
cnlohr
81.5 × 72.2 mm92 parts2LMIT105RISC-V
Keytartouch
cnlohr
152.5 × 117.5 mm69 parts2LMIT105RISC-V
Ch32v003f4u6 with wsled
cnlohr
40.6 × 44.5 mm26 parts2LMIT105