Pip-Cam Panelized Edge to board

AidansLab·Pip-Cam·Pip-Cam_Board/Pip-Cam_Panelized_Edge-to-board.kicad_pcb

Pip-Cam Panelized Edge to board layout, top view — open source ESP32 board by AidansLab

About the Pip-Cam Panelized Edge to board

Pip-Cam Panelized Edge to board is an open source ESP32 PCB design by AidansLab, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 21.4 × 52.4 mm, with 3 components from 3 distinct parts.

Its main chip is the XIAO-ESP32-S3-SMD, from the ESP32 family. By type, the board carries 1 IC, 1 switch and 1 resistor.

It belongs with the power & battery designs in this gallery.

From the project

A camera for the Pip-Boy MK V by The Wand Company

The Pip-Cam is a small camera module that plugs into the USB-C port of a Pip-Boy (MK V or Pip-Boy 3000). It takes a grayscale photo, dithers it down to the Pip-Boy's screen format, and uploads it straight to the Pip-Boy's filesystem. You can then browse and delete photos from a Pip-Cam app on the Pip-Boy, and re-tune the brightness and contrast of the latest photo.

Main components on the Pip-Cam Panelized Edge to board

Pip-Cam Panelized Edge to board bill of materials (BOM)

3 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XIAO-ESP32-S3-SMD
U1
1
SW_SPST_SKQG_WithStem
S1
1
R100K
R100k
R1

Pip-Cam Panelized Edge to board design files

The KiCad project lives in the AidansLab/Pip-Cam repository on GitHub; these links point at the commit this page was built from.

Pip-Cam Panelized Edge to board: common questions

What microcontroller does the Pip-Cam Panelized Edge to board use?

The Pip-Cam Panelized Edge to board is built around the XIAO-ESP32-S3-SMD, from the ESP32 family.

How big is the Pip-Cam Panelized Edge to board?

The Pip-Cam Panelized Edge to board measures 21.4 × 52.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pip-Cam Panelized Edge to board?

3 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Pip-Cam Panelized Edge to board design files?

From the AidansLab/Pip-Cam repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Pip-Cam Panelized Edge to board design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which AidansLab chose for the repository.

Can I test firmware for the Pip-Cam Panelized Edge to board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in Pip-Cam

Similar boards