TPMS-2018-Toyota-Yaris iA
AjayaDahal·TPMS-2018-Toyota-Yaris-iA·hardware/tpms_panel.kicad_pcb
About the TPMS-2018-Toyota-Yaris iA PCB
TPMS-2018-Toyota-Yaris iA is an open source ESP32 PCB design by AjayaDahal, published on GitHub. It is a 2-layer board measuring 189 × 128 mm, with 47 components from 31 distinct parts.
Its main chip is the ESP32_DevKit_V1, from the ESP32 family. Other key parts include the CC1101_315MHz, NHD-2.7-12864WDW3, TSR_1-2450 and AMS1117-3.3. By type, the board carries 15 resistors, 12 capacitors, 7 diodes, 4 ICs, 4 connectors and 1 module.
It belongs with the rf & radio and sensors designs in this gallery.
From the project
This is the hardware for the 315 MHz TPMS display described in the project report (../TPMSprojectreport_ECE6723.pdf). The board outline and front layout follow Figure 3.6 of the report. The whole project is generated by a script, so you can change the dimensions and rebuild it (s
This is the hardware for the 315 MHz TPMS display described in the project report (../TPMSprojectreport_ECE6723.pdf). The board outline and front layout follow Figure 3.6 of the report. The whole project is generated by a script, so you can change the dimensions and rebuild it (see section 7).
The sensor. The FCC report in your appendix is for the GM/Schrader EG53MA4 (FCC ID MRXEG53MA4). These are the four sensors installed in the car's tyres; the Yaris iA's own TPMS is indirect and uses no wheel sensors. Key specs: - 315 MHz ±70 kHz, ASK/OOK, Manchester coded. - Half-bit pulses are about…

Main components on the TPMS-2018-Toyota-Yaris iA
TPMS-2018-Toyota-Yaris iA bill of materials (BOM)
47 components, 31 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | EBYTE E07-M1101D-SMA (CC1101; 433 MHz-tuned build works at 315 MHz with some loss) + 2x4 2.54 mm female header + 315 MHz antenna CC1101_315MHz | CC1101_E07-M1101D_Socket | U1 |
| 1 | Newhaven NHD-2.7-12864WDW3 + 1x20 2.54 mm header + 4x M2 screws/nuts + 4x M2 x 3 mm spacers NHD-2.7-12864WDW3 | NHD-2.7-12864WDW3 | U2 |
| 1 | TRACO TSR 1-2450 (6.5-36 V in; alt. Mornsun K7805-1000R3, 8-36 V) TSR_1-2450 | Converter_DCDC_TRACO_TSR-1_THT | U3 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U4 |
| 1 | DOIT ESP32 DEVKIT V1 30-pin + 2x 1x15 2.54 mm female header ESP32_DevKit_V1 | ESP32_DOIT_DevKit_V1_30pin | A1 |
| 1 | MMBT3904 | SOT-23 | Q1 |
| 1 | Phoenix MKDS 1,5/2-5,08 (1715721) 12V_IN | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | 1x8 2.54 mm pin header CC1101_ALT | PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | 1x4 2.54 mm female header MX-05V(opt) | PinSocket_1x04_P2.54mm_Vertical | J3 |
| 1 | 1x7 2.54 mm pin header EXPANSION | PinHeader_1x07_P2.54mm_Vertical | J4 |
| 1 | 12 mm 5 V active magnetic buzzer, 7.6 mm pitch Buzzer_5V | Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | Bourns MF-MSMF075/24X-2 0.75A | Fuse_1812_4532Metric | F1 |
| 1 | EC11 rotary encoder with push switch (ALPS EC11E-switch type), 20 mm D-shaft + 20-25 mm knob EC11_Encoder_SW | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1 |
| 1 | 5 mm LED LED_FL | LED_D5.0mm | D1 |
| 1 | 5 mm LED LED_FR | LED_D5.0mm | D2 |
| 1 | 5 mm LED LED_RL | LED_D5.0mm | D3 |
| 1 | 5 mm LED LED_RR | LED_D5.0mm | D4 |
| 1 | SS34 | D_SMA | D5 |
| 1 | Littelfuse SMAJ22CA SMAJ22CA | D_SMA | D6 |
| 1 | 1N4148W | D_SOD-123 | D7 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Panasonic EEE-FK1H470XP 47u/50V | CP_Elec_6.3x7.7 | C1 |
| 1 | 1U/50V 1u/50V | C_1206_3216Metric | C2 |
| 1 | 22U/10V 22u/10V | C_1206_3216Metric | C3 |
| 3 | 10U/25V 10u/25V | C_1206_3216Metric | C4, C6, C8 |
| 1 | KEMET T491A226K010AT 22u/10V Ta | CP_EIA-3216-18_Kemet-A_HandSolder | C5 |
| 3 | 100N 100n | C_1206_3216Metric | C7, C9, C12 |
| 2 | 10N 10n | C_1206_3216Metric | C10, C11 |
| 4 | 220 | R_1206_3216Metric | R1, R2, R3, R4 |
| 7 | 10K 10k | R_1206_3216Metric | R5, R6, R7, R10, R12, R15, R16 |
| 2 | 1k | R_1206_3216Metric | R9, R11 |
| 2 | 4K7 4k7 | R_1206_3216Metric | R13, R14 |
TPMS-2018-Toyota-Yaris iA design files
The KiCad project lives in the AjayaDahal/TPMS-2018-Toyota-Yaris-iA repository on GitHub; these links point at the commit this page was built from.
TPMS-2018-Toyota-Yaris iA: common questions
What microcontroller does the TPMS-2018-Toyota-Yaris iA use?
The TPMS-2018-Toyota-Yaris iA is built around the ESP32_DevKit_V1, from the ESP32 family.
How big is the TPMS-2018-Toyota-Yaris iA PCB?
The TPMS-2018-Toyota-Yaris iA measures 189 × 128 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TPMS-2018-Toyota-Yaris iA?
47 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the TPMS-2018-Toyota-Yaris iA design files?
From the AjayaDahal/TPMS-2018-Toyota-Yaris-iA repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the TPMS-2018-Toyota-Yaris iA design in my own project?
The repository has no license, so all rights stay with AjayaDahal. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the TPMS-2018-Toyota-Yaris iA without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k