Esp32-dev kit
Akeelsalim·esp32-dev-kit
About the Esp32-dev kit PCB
Esp32-dev kit is an open source ESP32 PCB design by Akeelsalim, published on GitHub. It is a 4-layer board measuring 48.9 × 59.5 mm, with 34 components from 20 distinct parts.
Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the CP2102N-Axx-xQFN28 and AMS1117-3.3. By type, the board carries 10 resistors, 9 capacitors, 5 diodes, 3 connectors, 2 ICs and 2 transistors.
From the project
esp 32 dev kit pcb created using KICAD version 9.0.3
This project is a custom PCB design of the ESP32 DevKit, created using latest version of KiCad 9.0.3. The design is based on the official ESP32-DevKitC-v4 reference schematic from Espressif, with modifications to suit custom layout preferences and component placement.Gerber files are attached.
Main components on the Esp32-dev kit
Esp32-dev kit bill of materials (BOM)
34 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CP2102N-Axx-xQFN28 | TQFN-28-1EP_5x5mm_P0.5mm_EP2.7x2.7mm | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | ESP32-WROOM-32 | ESP32-WROOM-32D | MOD1 |
| 2 | MMSS8050-H-TP Micro Commercial Co | SOT-23-3 | Q1, Q2 |
| 1 | USB_B_Micro | USB_Micro-AB_Molex_47590-0001 | J1 |
| 2 | Conn_01x19_Pin | PinSocket_1x19_P2.54mm_Vertical | J2, J3 |
| 2 | SW_Push | SW_SPST_B3S-1000 | SW1, SW2 |
| 1 | LED | LED_0603_1608Metric | D1 |
| 1 | D_Schottky | D_SOD-323 | D3 |
| 3 | D_TVS | D_SOD-523 | D4, D5, D6 |
| 3 | 22µF/10V(20%) | C_0201_0603Metric | C1, C3, C21 |
| 4 | 0.1µF/50V(10%) | C_01005_0402Metric | C9, C14, C19, C22 |
| 1 | 0.1µf/50v(10%)(NC) | C_01005_0402Metric | C15 |
| 1 | 4.7µF/0.3V(10%) | C_01005_0402Metric | C20 |
| 2 | 2KΩ (5%) | R_01005_0402Metric | R2, R24 |
| 3 | 10KΩ(5%) | R_01005_0402Metric | R11, R21, R22 |
| 2 | 0R(5%) | R_01005_0402Metric | R17, R18 |
| 1 | 10KΩ(5%)(NC) | R_01005_0402Metric | R23 |
| 1 | 22.1KΩ(5%) | R_01005_0402Metric | R25 |
| 1 | 47.5KΩ(5%) | R_01005_0402Metric | R26 |
Esp32-dev kit design files
The KiCad project lives in the Akeelsalim/esp32-dev-kit repository on GitHub; these links point at the commit this page was built from.
- Layoutesp32devkitclone.kicad_pcb
- Schematicesp32devkitclone.kicad_sch
Esp32-dev kit: common questions
What microcontroller does the Esp32-dev kit use?
The Esp32-dev kit is built around the ESP32-WROOM-32, from the ESP32 family.
How big is the Esp32-dev kit PCB?
The Esp32-dev kit measures 48.9 × 59.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Esp32-dev kit?
34 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the Esp32-dev kit design files?
From the Akeelsalim/esp32-dev-kit repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Esp32-dev kit design in my own project?
The repository has no license, so all rights stay with Akeelsalim. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Esp32-dev kit without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k