ZTank
akira215·zTank·PCB/tank_PCB.kicad_pcb
About the ZTank PCB
ZTank is an open source ESP32 PCB design by akira215, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 49 × 91 mm, with 60 components from 33 distinct parts.
Its main chip is the ESP32-C6-WROOM-1, from the ESP32 family. Other key parts include the ADS1115IDGS, LM2735X (1.6MHz) and MCP1826S-3302E/DB. By type, the board carries 23 resistors, 19 capacitors, 7 diodes, 4 ICs, 4 connectors and 1 fuse.
It belongs with the iot & wireless designs in this gallery.
From the project
Zigbee Water tank monitor for Home Assistant
The design of the PCB has been done with KiCad 9.0. Particular footprint and 3D STEP file are included in the /footprints folder for sake of maintenance
The design is based on ESP32C6 WROOM with the following peripherials: USB for power, flash device and output serial debug / info. Powering circuit is done using MCP1826S A 4-20mA loop is built based on a LM2735X (1.6MHz) to raise voltage to about 20V 4 channels 4-20mA sensors is provided and converted using ADS1115IDGS. It communicate with µC with i2c port a debounced contact is provided for pulse counter A push button is also provided for…
Main components on the ZTank
ZTank bill of materials (BOM)
60 components, 33 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ADS1115IDGS | TSSOP-10_3x3mm_P0.5mm | U1 |
| 1 | LM2735X (1.6MHz) | SOT-23-5 | U3 |
| 1 | ESP32-C6-WROOM-1 | ESP32-C6-WROOM-1 | U4 |
| 1 | MCP1826S-3302E/DB | SOT-223-3_TabPin2 | U5 |
| 1 | TFT | PinHeader_1x14_P2.54mm_Vertical | J1 |
| 1 | 1985195 PTSA 1,5/ 2-3,5-Z | Phoenix Contact PTSA 2 | J2 |
| 1 | 1985250 PTSA 1,5/ 8-3,5-Z | Phoenix Contact PTSA 8 | J3 |
| 1 | USB4110GFA | GCT_USB4110GFA | J5 |
| 1 | BSMD0805-035-6V | Fuse_0805_2012Metric | F1 |
| 1 | TS07-667-30-BK-100-SMT-TR | CUI switch SW_TS07-667-30-BK-100-SMT-TR | S1 |
| 1 | Schottky 500mA | D_SOD-123 | D1 |
| 1 | 1N4148 | D_SOD-323_HandSoldering | D2 |
| 1 | 1N5819HW-7-F | D_SOD-123 | D3 |
| 3 | ESDALC5-1BT2 | D_SOD-882D | D4, D5, D6 |
| 1 | 1.8V 2mA | D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D7 |
| 1 | 33uH | L_10.4x10.4_H4.8 | L1 |
| 6 | 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C16, C17, C18, C19 |
| 1 | 22uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | 470pF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 33nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 4 | 10µF 25V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C8, C11, C13 |
| 4 | 100nF 25V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C12, C14, C15 |
| 1 | 1µF 16V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10 |
| 6 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R12, R13 |
| 1 | 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 10k 0,1% | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 150k 0,1% | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 4 | 133R 0,1% | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R9, R10, R11 |
| 3 | 10k 1% | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14, R17, R18 |
| 2 | 5.1k 1% | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15, R16 |
| 1 | 750R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R19 |
| 4 | 0R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20, R21, R22, R23 |
ZTank design files
The KiCad project lives in the akira215/zTank repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/tank_PCB.kicad_pcb
- SchematicPCB/tank_PCB.kicad_sch
ZTank: common questions
What microcontroller does the ZTank use?
The ZTank is built around the ESP32-C6-WROOM-1, from the ESP32 family.
How big is the ZTank PCB?
The ZTank measures 49 × 91 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ZTank?
60 components, from 33 distinct parts. The full bill of materials is listed on this page.
Where can I download the ZTank design files?
From the akira215/zTank repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ZTank design in my own project?
Yes, under the terms of its GPL-3.0 license, which akira215 chose for the repository.
Can I test firmware for the ZTank without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k