Stm8 breakout board
About the Stm8 breakout board
Stm8 breakout board is an open source STM32 PCB design by akuker, published on GitHub under the BSD-3-Clause license. It is a 2-layer board measuring 21.8 × 26.9 mm, with 23 components from 20 distinct parts.
Its main chip is the STM8S003F3P, from the STM32 family. Other key parts include the C111293 and CH340N. By type, the board carries 6 capacitors, 4 connectors, 4 resistors, 3 ICs, 3 diodes and 2 jumpers.
It belongs with the dev boards & breakouts designs in this gallery.
Main components on the Stm8 breakout board
Stm8 breakout board bill of materials (BOM)
23 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM8S003F3P | TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | C111293 XC6206 | SOT-23 | U2 |
| 1 | CH340N AMS1117-3.3 | SOT-223-3_TabPin2 | U3 |
| 1 | STLinkV2 Connector | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Conn_01x10_Male | PinHeader_1x10_P2.54mm_Vertical | J2 |
| 1 | Power Connector | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | U254-051N-4BH806 Conn_01x10_Male | PinHeader_1x10_P2.54mm_Vertical | J4 |
| 1 | SolderJumper_2_Bridged | SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1 |
| 1 | SolderJumper_2_Bridged | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | Reset | SW_TS-1187A-B-A-B | SW1 |
| 1 | 5v | LED_0603_1608Metric | D1 |
| 1 | C2286 3.3v | LED_0603_1608Metric | D2 |
| 1 | C2286 PC7 | LED_0603_1608Metric | D3 |
| 1 | 10u | C_0603_1608Metric | C1 |
| 2 | 100N 1u | C_0603_1608Metric | C2, C5 |
| 2 | 100N 10u | C_0603_1608Metric | C3, C4 |
| 1 | 10U 100n | C_0603_1608Metric | C6 |
| 2 | 1k | R_0603_1608Metric | R1, R3 |
| 1 | 10k | R_0603_1608Metric | R2 |
| 1 | 10K 1k | R_0603_1608Metric | R4 |
Stm8 breakout board design files
The KiCad project lives in the akuker/hw_projects repository on GitHub; these links point at the commit this page was built from.
Stm8 breakout board: common questions
What microcontroller does the Stm8 breakout board use?
The Stm8 breakout board is built around the STM8S003F3P, from the STM32 family.
How big is the Stm8 breakout board?
The Stm8 breakout board measures 21.8 × 26.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Stm8 breakout board?
23 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Stm8 breakout board design files?
From the akuker/hw_projects repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Stm8 breakout board design in my own project?
Yes, under the terms of its BSD-3-Clause license, which akuker chose for the repository.
Can I test firmware for the Stm8 breakout board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in hw_projects
Pixel grid
51.3 × 51.6 mm303 parts4LBSD-3-Clause2
RP2040/RP2350VintageKVM
200 × 73.6 mm120 parts2LBSD-3-Clause2
RP2040/RP2350Scsi switcher
160 × 100 mm75 parts4LBSD-3-Clause2
Rpi led board
65 × 22.4 mm59 parts2LBSD-3-Clause2
Daisy chain board
65 × 63.1 mm56 parts2LBSD-3-Clause2
WCH CH32/CH55xCh554 USB Host Test
55.1 × 19 mm19 parts2LBSD-3-Clause2
Apple II Breakout
100 × 80 mm8 parts2LBSD-3-Clause2
Ata 40 to ata 44 adapter
86 × 18.5 mm8 parts2LBSD-3-Clause2
Fifty pin header breakout
72.5 × 81 mm7 parts2LBSD-3-Clause2
787
92.3 × 97.8 mm4 parts2LBSD-3-Clause2
Similar boards
STM32AxxSolder
AxxAxx
39 × 82.5 mm122 parts2LGPL-3.01.7k
STM32AIOC
skuep
21 × 31.5 mm47 parts2LMIT1.4k
STM32Ferris
pierrechevalier83
208.8 × 86.8 mm102 parts2LSHL-2.11.3k
STM32Module 16S
stuartpittaway
71.1 × 89.6 mm113 parts4LCC-BY-NC-4.01.1k
STM32Djinn
tzarc
192.3 × 150.5 mm216 parts2LCERN-OHL-S-2.0988
STM32Ghoul
228.6 × 79.4 mm163 parts2LCERN-OHL-S-2.0988