12 open source boards using the STM8S003F3P

Real designs built with the STM8S003F3P, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

12 boardsClear filters|Most starred

How designs wire the STM8S003F3P

Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the STM8S003F3P connects to, and the resistors, capacitors and other passives placed on it.

  • The VCAP pin has a capacitor to GND on 11 of 11 designs, most often 1 µF (then 470 nF).
  • The VDD pin has a decoupling capacitor on 9 of 11 designs, most often 100 nF (then 10 µF).
  • The NRST pin has a capacitor to GND on 7 of 11 designs, most often 10 nF (then 1 µF).
  • The NRST pin has a pull-up to 3.3V on 5 of 11 designs, most often 10 kΩ.
NRSTpin 4Connected to: A connector 100%
  • Capacitor to GND on 64% · 10 nF (3), 1 µF (1), 100 nF (1)
  • Pull-up to 3.3V on 45% · 10 kΩ (5)
PA2pin 6Connected to: Signal 82% · not connected 18%
  • Series resistor on 36% · 330 Ω (1), 470 Ω (1), 510 Ω (1)
VSSpin 7Connected to: GND 100%
VCAPpin 8Connected to: Signal 100%
  • Capacitor to GND on 100% · 1 µF (5), 470 nF (2), 680 nF (1)
VDDpin 9Connected to: 3.3V 91%
  • Decoupling capacitor on 82% · 100 nF (6), 10 µF (3), 6.8 µF (1)
PB5pin 11Connected to: A connector 27% · not connected 27%
  • Pull-up to 5V on 45% · 47 kΩ (1), 4.7 kΩ (1), 2.2 kΩ (1)
PB4pin 12Connected to: A connector 27% · not connected 27%
  • Pull-up to 5V on 45% · 4.7 kΩ (2), 2.2 kΩ (1), 1.5 kΩ (1)
PD2pin 19Connected to: A connector 27% · not connected 18%
  • Series resistor on 36% · 330 Ω (1), 22 kΩ (1), 510 Ω (1)
PD3pin 20Connected to: Signal 91%
  • Series resistor on 36% · 4.7 kΩ (1), 22 kΩ (1), 510 Ω (1)

11 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Socket by eddyem, Ir clone by dilshan, Kvm base by thatoddmailbox and DataProcessingUnit by RobertGawron.

The STM8S003F3P in open source designs

The gallery holds 12 open source boards using the STM8S003F3P from 11 GitHub repositories; a typical one measures about 74.7 × 50 mm and carries around 45 components.

83% are two-layer designs, the rest use four layers or more, and 58% carry an open source license.

The most starred is Socket by eddyem.

Parts used alongside the STM8S003F3P

Microcontrollers on boards using the STM8S003F3P

STM8S003F3P: common questions

Where can I find a STM8S003F3P reference design?

Each of the 12 boards on this page is a real design using the STM8S003F3P. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the STM8S003F3P VCAP pin connected?

The VCAP pin has a capacitor to GND on 11 of 11 designs, most often 1 µF (then 470 nF). Counted from the KiCad layouts of 11 open source designs using the STM8S003F3P.

What decoupling capacitors do designs use on the STM8S003F3P VDD pin?

The VDD pin has a decoupling capacitor on 9 of 11 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 11 open source designs using the STM8S003F3P.

How is the STM8S003F3P NRST pin connected?

The NRST pin has a capacitor to GND on 7 of 11 designs, most often 10 nF (then 1 µF). Counted from the KiCad layouts of 11 open source designs using the STM8S003F3P.

Which microcontrollers do boards using the STM8S003F3P use?

Most are built on STM32 (11) and ESP32 (1).

How big is a typical board using the STM8S003F3P?

The median is 74.7 × 50 mm, and 83% are two-layer designs.

What is the most popular open source board using the STM8S003F3P?

By GitHub stars, Socket by eddyem, with 80 stars.

Can I simulate one of these boards using the STM8S003F3P before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part