BIRDS-X-Test-Fixture
AlbertaSat·BIRDS-X_PCB·BIRDS-X-Test-Fixture-PCB/BIRDS-X-Test-Fixture-PCB.kicad_pcb
About the BIRDS-X-Test-Fixture PCB
BIRDS-X-Test-Fixture is an open source PCB design by AlbertaSat, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 97.3 × 99.3 mm, with 36 components from 17 distinct parts.
By type, the board carries 15 connectors, 5 jumpers, 2 LEDs, 2 resistors and 1 capacitor.
It belongs with the rf & radio, sensors and science & space designs in this gallery.
From the project
Repository for the PCB design for the BIRDS-X project
JASPER is a joint organization between the University of Alberta's AlbertaSat and the University of Calgary's CalgaryToSpace cubesat teams.
This repository is licensed under the "CERN Open Hardware Licence Version 2 - Permissive (CERN OHL v2 Permissive)" license. For more information, see the choosealicense.com description of the license.

BIRDS-X-Test-Fixture bill of materials (BOM)
36 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 7 | MountingHole_Pad | EdgeAlligatorConnector | H_3V3_1, H_3V3_DUT_1, H_5V_1, H_5V_DUT_1, H_GND_1, H_GND_2, H_GND_3 |
| 1 | LPC-50M2LG | PinHeader_2x25_P2.00mm_Horizontal | J101 |
| 2 | CONN_01X05 Conn_01x05 | PinHeader_1x05_P2.54mm_Vertical | J102, J109 |
| 2 | ~ | PinHeader_2x25_P2.54mm_Vertical | J103, J104 |
| 1 | CONN_01X06 Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J105 |
| 2 | CONN_02X05_ODD_EVEN Conn_02x05_Odd_Even | IDC-Header_2x05_P2.54mm_Latch_Vertical | J110, J111 |
| 1 | JUMPER_3_OPEN Jumper_3_Open | PinHeader_1x03_P2.54mm_Vertical | JP101 |
| 4 | SOLDERJUMPER_2_OPEN SolderJumper_2_Open | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP102, JP103, JP104, JP105 |
| 2 | Jumper_2_Bridged | PinHeader_1x02_P2.54mm_Vertical | JP_3V_SENSE_1, JP_5V_SENSE_1 |
| 4 | Screw_Terminal_01x02 | TerminalBlock_bornier-2_P5.08mm | J_3V3_1, J_3V3_2, J_5V_1, J_5V_2 |
| 1 | 1k | R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R_3V3 |
| 1 | 2.2k | R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R_5V0 |
| 2 | SW_SPDT | SW_Slide_1P2T_CK_OS102011MS2Q | SW_3V3_EN_DIO1, SW_5V_EN_DIO2 |
| 1 | SW_Push | SW_PUSH_6mm | SW_RST1 |
| 2 | LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D_3V3, D_5V0 |
| 1 | 100N 100n | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C101 |
| 2 | 1k | R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R101, R102 |
BIRDS-X-Test-Fixture design files
The KiCad project lives in the AlbertaSat/BIRDS-X_PCB repository on GitHub; these links point at the commit this page was built from.
BIRDS-X-Test-Fixture: common questions
How big is the BIRDS-X-Test-Fixture PCB?
The BIRDS-X-Test-Fixture measures 97.3 × 99.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BIRDS-X-Test-Fixture?
36 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the BIRDS-X-Test-Fixture design files?
From the AlbertaSat/BIRDS-X_PCB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the BIRDS-X-Test-Fixture design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which AlbertaSat chose for the repository.
More boards in BIRDS-X_PCB
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kUSB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956