Mini console-
Alen1132011·Mini-console-·PCB/Mini console.kicad_pcb
About the Mini console- PCB
Mini console- is an open source ESP32 PCB design by Alen1132011, published on GitHub. It is a 2-layer board measuring 68 × 48 mm, with 17 components from 16 distinct parts.
Its main chip is the ESP32-C3-SuperMini, from the ESP32 family. By type, the board carries 7 switches, 5 connectors, 3 capacitors, 1 IC and 1 buzzer.
It belongs with the power & battery and displays & leds designs in this gallery.
From the project
Mini Console v1 is a small DIY retro gaming console built completely from scratch. The idea was to make a fun little device to kill some boredom, designed in KiCad and programmed for the ESP32-C3.
Main components on the Mini console-
Mini console- bill of materials (BOM)
17 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-SuperMini | ESP32-C3-SuperMini | U2 |
| 1 | OLED | ER_OLEDM0.91_1x-I2C | J1 |
| 1 | BATTERY | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J2 |
| 1 | CHARGER | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J3 |
| 1 | TP4056 module | 4056E_LiIon_loader | J4 |
| 1 | 5V boost module | MT3608_module | J5 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | BTN_UP | SW_PUSH_6mm_H5mm | SW1 |
| 1 | BTN_DOWN | SW_PUSH_6mm_H5mm | SW2 |
| 1 | BTN_LEFT | SW_PUSH_6mm_H5mm | SW3 |
| 1 | BTN_RIGHT | SW_PUSH_6mm_H5mm | SW4 |
| 1 | BTN_A | SW_PUSH_6mm_H5mm | SW5 |
| 1 | BTN_B | SW_PUSH_6mm_H5mm | SW6 |
| 1 | SW_SPST | SW_DIP_SPSTx01_Slide_6.7x4.1mm_W6.73mm_P2.54mm_LowProfile_JPin | SW7 |
| 2 | 100nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2 |
| 1 | 10 mikro F | CP_Radial_D5.0mm_P2.00mm | C3 |
Mini console- design files
The KiCad project lives in the Alen1132011/Mini-console- repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/Mini console.kicad_pcb
- SchematicPCB/Mini console.kicad_sch
Mini console-: common questions
What microcontroller does the Mini console- use?
The Mini console- is built around the ESP32-C3-SuperMini, from the ESP32 family.
How big is the Mini console- PCB?
The Mini console- measures 68 × 48 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Mini console-?
17 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Mini console- design files?
From the Alen1132011/Mini-console- repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Mini console- design in my own project?
The repository has no license, so all rights stay with Alen1132011. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Mini console- without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k