PCBs for-Project-North-Star-Next

alex-chuf·PCBs-for-Project-North-Star-Next·USB3 Hub/USB3 Hub.kicad_pcb

PCBs for-Project-North-Star-Next PCB layout, top view — open source board by alex-chuf

About the PCBs for-Project-North-Star-Next PCB

PCBs for-Project-North-Star-Next is an open source PCB design by alex-chuf, published on GitHub. It is a 4-layer board measuring 37.8 × 22.9 mm, with 91 components from 23 distinct parts.

Other key parts include the W25Q80DVUXIE. By type, the board carries 50 capacitors, 17 resistors, 8 inductors, 6 connectors, 5 diodes and 4 ICs.

It belongs with the sensors designs in this gallery.

From the project

This USB3 Hub board is specially used on some AR/VR DIY project, that requires:

This USB3 Hub board is specially used on some AR/VR DIY project, that requires:

-less cable connect to the host machine -need to connect at least 2 USB camera sensors, or other sensors that work on USB2 or USB3 -keep the USB3 hub size as small as possible

I recently worked on an AR project called project north star. I found there was an issue with connecting the sensors to the host , normally we will use at least 2 camera sensor (e.g. Ultraleap IR170, Intelrealsense T261/T265), these sensors can both work on USB2 and USB3. You may connect them to a cheap and small size USB2 hub, but the…

Main components on the PCBs for-Project-North-Star-Next

PCBs for-Project-North-Star-Next bill of materials (BOM)

91 components, 23 distinct parts.

QtyPartRefs
1
~
U1
1
~
U2
1
~
U3
1
W25Q80DVUXIE
U4
1
Crystal_GND24 25MHz
Y1
1
USB_C_Receptacle
J1
4
FPC-0.5-12PFPC-0.5-12P
J2, J3, J4, J5
1
Conn_01x03_Socket
J6
5
ESD5451N-TP
D1, D10, D11, D12, D13
2
2.2uH
L1, L2
2
L
L3, L4
4
0805
L5, L6, L7, L8
2
4.7uF
C1, C2
4
22pF
C3, C4, C21, C22
8
10uF
C5, C6, C40, C41, C42, C43, C44, C45
26
100nF
C7, C8, C9, C10, C13, C14, C16, C17 +18
10
22uF
C11, C12, C15, C18, C23, C32, C47, C48 +2
1
22k
R1
4
100K
R2, R3, R4, R14
3
20K
R5, R6, R13
Show 3 more
QtyPartRefs
7
10K
R7, R8, R9, R11, R12, R24, R25
1
1M
R10
1
0K
R15

PCBs for-Project-North-Star-Next design files

The KiCad project lives in the alex-chuf/PCBs-for-Project-North-Star-Next repository on GitHub; these links point at the commit this page was built from.

PCBs for-Project-North-Star-Next: common questions

How big is the PCBs for-Project-North-Star-Next PCB?

The PCBs for-Project-North-Star-Next measures 37.8 × 22.9 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the PCBs for-Project-North-Star-Next?

91 components, from 23 distinct parts. The full bill of materials is listed on this page.

Where can I download the PCBs for-Project-North-Star-Next design files?

From the alex-chuf/PCBs-for-Project-North-Star-Next repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the PCBs for-Project-North-Star-Next design in my own project?

The repository has no license, so all rights stay with alex-chuf. Use it as a reference, and ask the author before reusing the design.

Similar boards