7 open source boards using the W25Q80DVUXIE

Real designs built with the W25Q80DVUXIE, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the W25Q80DVUXIE

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the W25Q80DVUXIE connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 10 µF).
  • The CS pin has a pull-up to 3.3V on 4 of 6 designs, most often 10 kΩ.
  • The IO2 pin has a pull-up to 3.3V on 4 of 6 designs, most often 10 kΩ.
  • The IO3 pin has a pull-up to 3.3V on 4 of 6 designs, most often 10 kΩ.
CSpin 1Connected to: The microcontroller 83%
  • Pull-up to 3.3V on 67% · 10 kΩ (4)
  • Series resistor on 33% · 1 kΩ (2)
IO2pin 3Connected to: The microcontroller 33%
  • Pull-up to 3.3V on 67% · 10 kΩ (4)
GNDpin 4Connected to: GND 100%
CLKpin 6Connected to: The microcontroller 83%
  • Pull-up to 3.3V on 50% · 10 kΩ (3)
IO3pin 7Connected to: The microcontroller 33%
  • Pull-up to 3.3V on 67% · 10 kΩ (4)
VCCpin 8Connected to: 3.3V 100%
  • Decoupling capacitor on 83% · 100 nF (14), 10 µF (2), 2.2 µF (1)

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Rusty probe by probe-rs, Tk1 by tillitis, MSA by aezrapour and PCBs for-Project-North-Star-Next by alex-chuf.

The W25Q80DVUXIE in open source designs

The gallery holds 7 open source boards using the W25Q80DVUXIE from 6 GitHub repositories; a typical one measures about 40 × 22.9 mm and carries around 53 components.

57% are two-layer designs, the rest use four layers or more, and 57% carry an open source license.

The most starred is Rusty probe by probe-rs.

Microcontrollers on boards using the W25Q80DVUXIE

What boards using the W25Q80DVUXIE are built for

W25Q80DVUXIE: common questions

Where can I find a W25Q80DVUXIE reference design?

Each of the 7 boards on this page is a real design using the W25Q80DVUXIE. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the W25Q80DVUXIE VCC pin?

The VCC pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the W25Q80DVUXIE.

What pull-up resistor is used on the W25Q80DVUXIE CS pin?

The CS pin has a pull-up to 3.3V on 4 of 6 designs, most often 10 kΩ. Counted from the KiCad layouts of 6 open source designs using the W25Q80DVUXIE.

What pull-up resistor is used on the W25Q80DVUXIE IO2 pin?

The IO2 pin has a pull-up to 3.3V on 4 of 6 designs, most often 10 kΩ. Counted from the KiCad layouts of 6 open source designs using the W25Q80DVUXIE.

What parts are used alongside the W25Q80DVUXIE?

The CH552E, ICE40UP5K-SG48ITR, MCP1824T-2502EOT, MIC5258-1.2YM5 and NCP752BSN33T1G appear in the most repositories here.

Which microcontrollers do boards using the W25Q80DVUXIE use?

Most are built on FPGA (3) and RP2040/RP2350 (3).

How big is a typical board using the W25Q80DVUXIE?

The median is 40 × 22.9 mm, and 57% are two-layer designs.

What is the most popular open source board using the W25Q80DVUXIE?

By GitHub stars, Rusty probe by probe-rs, with 170 stars.

Can I simulate one of these boards using the W25Q80DVUXIE before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part