ESP32-WROOM-Socket-Legacy v2
About the ESP32-WROOM-Socket-Legacy v2 PCB
ESP32-WROOM-Socket-Legacy v2 is an open source ESP32 PCB design by alexandrebobkov, published on GitHub under the MIT license. It is a 2-layer board measuring 35.6 × 35.6 mm, with 5 components from 4 distinct parts.
Its main chip is the ESP32-WROOM-32D, from the ESP32 family. By type, the board carries 2 resistors, 1 IC, 1 switch and 1 diode.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
KiCAD PBC projects
Main components on the ESP32-WROOM-Socket-Legacy v2
ESP32-WROOM-Socket-Legacy v2 bill of materials (BOM)
5 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32D | ESP32-WROOM-Adapter-Legacy-v3 | U1 |
| 1 | SW_Push | SW_SPST_6x3 | SW1 |
| 1 | LED_SMD_5050 | LED_5050-6 | D1 |
| 2 | R | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
ESP32-WROOM-Socket-Legacy v2 design files
The KiCad project lives in the alexandrebobkov/KiCAD-Projects repository on GitHub; these links point at the commit this page was built from.
ESP32-WROOM-Socket-Legacy v2: common questions
What microcontroller does the ESP32-WROOM-Socket-Legacy v2 use?
The ESP32-WROOM-Socket-Legacy v2 is built around the ESP32-WROOM-32D, from the ESP32 family.
How big is the ESP32-WROOM-Socket-Legacy v2 PCB?
The ESP32-WROOM-Socket-Legacy v2 measures 35.6 × 35.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP32-WROOM-Socket-Legacy v2?
5 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the ESP32-WROOM-Socket-Legacy v2 design files?
From the alexandrebobkov/KiCAD-Projects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ESP32-WROOM-Socket-Legacy v2 design in my own project?
Yes, under the terms of its MIT license, which alexandrebobkov chose for the repository.
Can I test firmware for the ESP32-WROOM-Socket-Legacy v2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in KiCAD-Projects
Class AB Stereo Amp SMD
100 × 100 mm78 parts2LMIT2
ESP32Esp32-wroom socket v3
99.1 × 96.5 mm31 parts2LMIT2
ESP32ESP32-C3-BreadBoardAdapter 2025-06
52.1 × 40.6 mm31 parts2LMIT2
ESP32ESP32-C3-BreadBoardAdapter
50.8 × 39.4 mm29 parts2LMIT2
Audio-Amplifier TDA2822
50 × 50 mm28 parts2LMIT2
ESP32Esp32-wroom adapter epaper
95 × 78 mm26 parts2LMIT2
ESP32ESP32-C3-WROOM-Node-Temperature
65 × 40 mm23 parts2LMIT2
ESP32Esp32-node board-40x65 PWR
65.2 × 40 mm22 parts2LMIT2
555 toggle switch v2
29.8 × 39.8 mm18 parts2LMIT2
ESP32Esp32-c3-wroom socket
30.5 × 25.4 mm13 parts2LMIT2
ESP32ESP32-WROOM-Socket v4-SMD
41.7 × 41.7 mm6 parts2LMIT2
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3k
ESP32Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Badge
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Racer
36 × 50.2 mm70 parts4LApache-2.03.8k