Self cap
alexDickhans·self-cap
About the Self cap PCB
Self cap is an open source ESP32 PCB design by alexDickhans, published on GitHub. It is a 4-layer board measuring 45.2 × 19.8 mm, with 27 components from 17 distinct parts.
Its main chip is the ESP32-C6-MINI-1, from the ESP32 family. Other key parts include the MAX40200AUK and SPX3819M5-L-3-3. By type, the board carries 12 resistors, 7 capacitors, 3 ICs, 3 connectors and 2 diodes.
It belongs with the power & battery designs in this gallery.
From the project
A small self-capacitance board from the HIRO Group. An ESP32-C6-MINI-1 reads seven electrode holes along one edge. Power comes from USB-C or a single-cell battery on a JST PH connector.
A small self-capacitance board from the HIRO Group. An ESP32-C6-MINI-1 reads seven electrode holes along one edge. Power comes from USB-C or a single-cell battery on a JST PH connector.
Open self-cap.kicadpro in KiCad 9. The electrode-hole footprint lives in self-cap-conn.pretty. The silkscreen reads HIRO Group Self-Cap PCB v1**.
Top. The ESP32-C6-MINI-1 lands on the right, and the USB-C receptacle is the pair of slots on the left. The module can and the connector shell are not drawn here; the footprints are.

Main components on the Self cap
Self cap bill of materials (BOM)
27 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C6-MINI-1 | ESP32-C6-MINI-1 | U1 |
| 1 | MAX40200AUK | SOT-23-5 | U2 |
| 1 | SPX3819M5-L-3-3 | SOT-23-5 | U3 |
| 1 | Conn_01x08_Socket | self-cap-connn | J1 |
| 1 | C295747 JST | JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J2 |
| 1 | C134092 USB_C_Plug_USB2.0 | USB_C_Receptacle_Molex_105450-0101 | P1 |
| 1 | PWR | LED_0603_1608Metric | D1 |
| 1 | STAT | LED_0603_1608Metric | D2 |
| 1 | 10UF 10u | C_0402_1005Metric | C1 |
| 3 | 100NF 0.1u | C_0402_1005Metric | C2, C3, C4 |
| 1 | 10NF 10n | C_0402_1005Metric | C5 |
| 2 | 22UF 22u | C_0603_1608Metric | C6, C7 |
| 1 | 100K 100k | R_0402_1005Metric | R1 |
| 1 | 1k | R_0402_1005Metric | R2 |
| 7 | 1m-100m | C_0402_1005Metric | R3, R4, R5, R6, R7, R8, R9 |
| 1 | 5.1K 5.1k | C_0402_1005Metric | R10 |
| 2 | 330 | C_0603_1608Metric | R12, R13 |
Self cap design files
The KiCad project lives in the alexDickhans/self-cap repository on GitHub; these links point at the commit this page was built from.
- Layoutself-cap.kicad_pcb
- Schematicself-cap.kicad_sch
- BOMproduction/bom.csv
Self cap: common questions
What microcontroller does the Self cap use?
The Self cap is built around the ESP32-C6-MINI-1, from the ESP32 family.
How big is the Self cap PCB?
The Self cap measures 45.2 × 19.8 mm, has 4 copper layers and is 1.6062 mm thick.
How many components are on the Self cap?
27 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Self cap design files?
From the alexDickhans/self-cap repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Self cap design in my own project?
The repository has no license, so all rights stay with alexDickhans. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Self cap without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k