HardLabs

HB-UNI-SEN-BATT

alexreinert·PCB·HB-UNI-SEN-BATT/HB-UNI-SEN-BATT.kicad_pcb

HB-UNI-SEN-BATT PCB layout, top view — open source AVR/Arduino board by alexreinert
Simulate this board

About the HB-UNI-SEN-BATT PCB

HB-UNI-SEN-BATT is an open source AVR/Arduino PCB design by alexreinert, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 75 × 75 mm, with 25 components from 21 distinct parts.

Its main chip is the CP2102N, from the AVR/Arduino family. Other key parts include the SRV05-4. By type, the board carries 9 connectors, 5 resistors, 2 ICs, 2 battery holders, 2 diodes and 1 transistor.

It belongs with the usb & debug tools and rf & radio designs in this gallery.

From the project

Some of my PCBs

Dieses Werk ist lizenziert unter einer Creative Commons Namensnennung - Nicht-kommerziell - Weitergabe unter gleichen Bedingungen 4.0 International Lizenz.

Bei Nutzung der Platinen freue ich mich über Feedback und kleine Aufmerksamkeiten aus meiner Amazon Wunschliste.

Viele Platinen gibt es auch im offiziellen Shop viopcb.

HB-UNI-SEN-BATT, from the project README
From the project README

Main components on the HB-UNI-SEN-BATT

CP2102NSRV05-4

HB-UNI-SEN-BATT bill of materials (BOM)

25 components, 21 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CP2102N
ArduinoProMini
U1
1
SRV05-4
CC1101
U2
1
AO3401A
IRLU024N
Q1
1
BATT
J0
1
I2C_1
J1
1
CONN_02X20_ODD_EVEN
I2C_2
J2
1
A0
J3
1
A1
J4
1
A2
J5
1
A3
J6
1
PROG
J7
1
NO
J8
2
AA
BT1, BT2
1
I2C_1A
JA1
1
I2C_2A
JA2
1
CONFIG_BUTTON
SW1
2
LED
D1, D2
1
10NF
10uF
C1
2
470
R1, R2
1
10K
100K
R3
Show 1 more
QtyPartRefs
2
10K
R4, R5

HB-UNI-SEN-BATT design files

The KiCad project lives in the alexreinert/PCB repository on GitHub; these links point at the commit this page was built from.

HB-UNI-SEN-BATT: common questions

What microcontroller does the HB-UNI-SEN-BATT use?

The HB-UNI-SEN-BATT is built around the CP2102N, from the AVR/Arduino family.

How big is the HB-UNI-SEN-BATT PCB?

The HB-UNI-SEN-BATT measures 75 × 75 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the HB-UNI-SEN-BATT?

25 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the HB-UNI-SEN-BATT design files?

From the alexreinert/PCB repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the HB-UNI-SEN-BATT design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

Can I test firmware for the HB-UNI-SEN-BATT without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in PCB

Similar boards