HB-RF-USB-2
About the HB-RF-USB-2 PCB
HB-RF-USB-2 is an open source PCB design by alexreinert, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 85 × 56 mm, with 27 components from 14 distinct parts.
Other key parts include the CP2102N and SRV05-4. By type, the board carries 10 capacitors, 8 resistors, 4 transistors, 2 ICs, 2 connectors and 1 inductor.
It belongs with the usb & debug tools and rf & radio designs in this gallery.
From the project
Some of my PCBs
Dieses Werk ist lizenziert unter einer Creative Commons Namensnennung - Nicht-kommerziell - Weitergabe unter gleichen Bedingungen 4.0 International Lizenz.
Bei Nutzung der Platinen freue ich mich über Feedback und kleine Aufmerksamkeiten aus meiner Amazon Wunschliste.
Viele Platinen gibt es auch im offiziellen Shop viopcb.
Main components on the HB-RF-USB-2
HB-RF-USB-2 bill of materials (BOM)
27 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CP2102N | SiliconLabs_QFN-20-1EP_3x3mm_P0.5mm | U1 |
| 1 | SRV05-4 | SOT-23-6 | U2 |
| 2 | AO3401A | SOT-23 | Q1, Q2 |
| 1 | AO3400A | SOT-23 | Q3 |
| 1 | S8050 | SOT-23 | Q4 |
| 1 | USB_B | USB_B_OST_USB-B1HSxx_Horizontal | J1 |
| 1 | CONN_02X20_ODD_EVEN Conn_02x20_Odd_Even | PinHeader_2x20_P2.54mm_Vertical | J2 |
| 1 | C1015 Ferrite Bead | L_0805_2012Metric | L1 |
| 2 | 10NF 10nF | C_0402_1005Metric | C1, C2 |
| 6 | 100NF 100nF | C_0402_1005Metric | C3, C5, C7, C8, C9, C10 |
| 2 | 4.7UF 4.7uF | C_0603_1608Metric | C4, C6 |
| 1 | 1M | R_0402_1005Metric | R1 |
| 3 | 1K | R_0402_1005Metric | R2, R6, R7 |
| 4 | 10K | R_0402_1005Metric | R3, R4, R5, R8 |
HB-RF-USB-2 design files
The KiCad project lives in the alexreinert/PCB repository on GitHub; these links point at the commit this page was built from.
HB-RF-USB-2: common questions
How big is the HB-RF-USB-2 PCB?
The HB-RF-USB-2 measures 85 × 56 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the HB-RF-USB-2?
27 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the HB-RF-USB-2 design files?
From the alexreinert/PCB repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the HB-RF-USB-2 design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
More boards in PCB
ESP32HB-RF-ETH
85 × 56 mm86 parts2LCC-BY-NC-4.0104
AVR/ArduinoHB-UNI-644
79 × 78 mm64 parts2LCC-BY-NC-4.0104
AVR/ArduinoHB-UNI-SEN-BATT
75 × 75 mm25 parts2LCC-BY-NC-4.0104
HB-UNI-644-S4-A4
31.1 × 24.1 mm24 parts2LCC-BY-NC-4.0104
HB-RF-USB
47.6 × 52.1 mm22 parts2LCC-BY-NC-4.0104
AVR/ArduinoHB-UNI-SEN-WEA
45.7 × 45.7 mm17 parts2LCC-BY-NC-4.0104
AVR/ArduinoHB-UNI-SEN
44.5 × 30.5 mm15 parts2LCC-BY-NC-4.0104
Similar boards
USB Hub Test
osy
50 × 50 mm85 parts4LCC-BY-4.0703
XG Station Power
54.3 × 91 mm9 parts2LCC-BY-4.0703
Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675
Hat
65 × 56 mm81 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
FW-EC-DongleHiderPlus
LeoDJ
28.2 × 26.1 mm14 parts4LCERN-OHL-W-2.0490