HardLabs

HB-UNI-SEN-WEA

alexreinert·PCB·HB-UNI-SEN-WEA/HB-UNI-SEN-WEA.kicad_pcb

HB-UNI-SEN-WEA PCB layout, top view — open source AVR/Arduino board by alexreinert
Simulate this board

About the HB-UNI-SEN-WEA PCB

HB-UNI-SEN-WEA is an open source AVR/Arduino PCB design by alexreinert, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 45.7 × 45.7 mm, with 17 components from 17 distinct parts.

Its main chip is the CP2102N, from the AVR/Arduino family. Other key parts include the SRV05-4. By type, the board carries 9 connectors, 2 ICs, 2 capacitors, 2 resistors, 1 transistor and 1 switch.

It belongs with the usb & debug tools and rf & radio designs in this gallery.

From the project

Some of my PCBs

Dieses Werk ist lizenziert unter einer Creative Commons Namensnennung - Nicht-kommerziell - Weitergabe unter gleichen Bedingungen 4.0 International Lizenz.

Bei Nutzung der Platinen freue ich mich über Feedback und kleine Aufmerksamkeiten aus meiner Amazon Wunschliste.

Viele Platinen gibt es auch im offiziellen Shop viopcb.

HB-UNI-SEN-WEA, from the project README
From the project README

Main components on the HB-UNI-SEN-WEA

CP2102NSRV05-4

HB-UNI-SEN-WEA bill of materials (BOM)

17 components, 17 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CP2102N
ArduinoProMini
U1
1
SRV05-4
CC1101
U2
1
AO3401A
MPSA13
Q1
1
PWR
J1
1
CONN_02X20_ODD_EVEN
I2C_1
J2
1
I2C_2
J3
1
I2C_3
J4
1
ANEMOMETER
J5
1
RAIN_VOL
J6
1
WIND_DIR
J7
1
RAIN_SENS
J8
1
LIGHTNING
J9
1
CONFIG_BUTTON
SW1
1
10NF
1nF
C1
1
10NF
10uF
C2
1
10K
R1
1
100K
R2

HB-UNI-SEN-WEA design files

The KiCad project lives in the alexreinert/PCB repository on GitHub; these links point at the commit this page was built from.

HB-UNI-SEN-WEA: common questions

What microcontroller does the HB-UNI-SEN-WEA use?

The HB-UNI-SEN-WEA is built around the CP2102N, from the AVR/Arduino family.

How big is the HB-UNI-SEN-WEA PCB?

The HB-UNI-SEN-WEA measures 45.7 × 45.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the HB-UNI-SEN-WEA?

17 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the HB-UNI-SEN-WEA design files?

From the alexreinert/PCB repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the HB-UNI-SEN-WEA design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

Can I test firmware for the HB-UNI-SEN-WEA without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in PCB

Similar boards