Laser Arcade Blaster
AlexWheelock·Laser-Arcade-Project·KiCad/Project.kicad_pcb
About the Laser Arcade Blaster PCB
Laser Arcade Blaster is an open source PIC PCB design by AlexWheelock, published on GitHub. It is a 2-layer board measuring 129.7 × 40.6 mm, with 49 components from 37 distinct parts.
Its main chip is the PIC16F1788-IP, from the PIC family. Other key parts include the FT232RL and Audio Board. By type, the board carries 15 resistors, 8 capacitors, 7 connectors, 5 switches, 5 diodes and 3 ICs.
From the project
All documentation of the Laser Arcade Project
Main components on the Laser Arcade Blaster
Laser Arcade Blaster bill of materials (BOM)
49 components, 37 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PIC16F1788-IP TLV1117-50 | SOT-223-3_TabPin2 | U1 |
| 1 | FT232RL PIC16F1788-IP | SSOP-28 | U2 |
| 1 | Audio Board | Project_Audio_Board | U3 |
| 3 | BUK9832-55A | SOT-223-3_TabPin2 | Q1, Q2, Q3 |
| 1 | ~ | PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | Power & Output Test Points | PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | I2C Inputs Test Points | PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | I2C ~ | PinHeader_1x11_P2.54mm_Vertical | J4 |
| 1 | I2C ~ | PinHeader_1x16_P2.54mm_Vertical | J5 |
| 1 | ~ | PinHeader_1x11_P2.54mm_Vertical | J6 |
| 1 | ~ | PinHeader_1x16_P2.54mm_Vertical | J7 |
| 1 | 7.4V | Project_Battery_Connector | BT1 |
| 2 | Laser Diode | Project_Locking_Output_Header | LD1, LD2 |
| 1 | Solenoid | Project_Locking_Output_Header | S1 |
| 1 | Power | Project_Locking_Output_Header | SW1 |
| 1 | Fire | Project_Locking_Output_Header | SW2 |
| 1 | Freq Select | Project_Blaster_Freq_Switch | SW3 |
| 1 | Fire Select | Project_Locking_Header_1x06 | SW4 |
| 1 | +7.4V | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | 1N4148 | D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
Show 17 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | +5V | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 2 | 1N4148 | D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4, D5 |
| 1 | 220UF 220uF | Project_16V_220uF_Capacitor | C1 |
| 1 | 220UF 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 0.1UF 220uF | Project_16V_220uF_Capacitor | C3 |
| 1 | 1UF 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | 1UF 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 220UF 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | 0.1UF 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7 |
| 1 | 0.1UF 50pF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 1 | 8.2kΩ | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 4.7kΩ | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 10kΩ | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 5 | 330Ω | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5, R6, R7, R8 |
| 3 | 100kΩ | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R10, R11 |
| 3 | 0Ω | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12, R13, R14 |
| 1 | 1kΩ | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R15 |
Laser Arcade Blaster design files
The KiCad project lives in the AlexWheelock/Laser-Arcade-Project repository on GitHub; these links point at the commit this page was built from.
Laser Arcade Blaster: common questions
What microcontroller does the Laser Arcade Blaster use?
The Laser Arcade Blaster is built around the PIC16F1788-IP, from the PIC family.
How big is the Laser Arcade Blaster PCB?
The Laser Arcade Blaster measures 129.7 × 40.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Laser Arcade Blaster?
49 components, from 37 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Laser Arcade Blaster design files?
From the AlexWheelock/Laser-Arcade-Project repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Laser Arcade Blaster design in my own project?
The repository has no license, so all rights stay with AlexWheelock. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Laser Arcade Blaster without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
More boards in Laser-Arcade-Project
Similar boards
PIC
Pslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7kPIC
Lens
ervanalb
80 × 80 mm53 parts4LNo license515PIC
Micro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414PIC
GB-CARTPP-DIY
Gekkio
100 × 100 mm22 parts2LCC-BY-4.0379PIC
GB-LIVE32
Gekkio
51.4 × 61 mm46 parts4LCC-BY-4.0379PIC
GB-CART256K-A
Gekkio
51.4 × 61 mm17 parts2LCC-BY-4.0379