Laser Arcade Master

AlexWheelock·Laser-Arcade-Project·KiCad/Target_Master/Target.kicad_pcb

Laser Arcade Master PCB layout, top view — open source PIC board by AlexWheelock

About the Laser Arcade Master PCB

Laser Arcade Master is an open source PIC PCB design by AlexWheelock, published on GitHub. It is a 2-layer board measuring 76.2 × 50.8 mm, with 37 components from 22 distinct parts.

Its main chip is the PIC16F1788-IP, from the PIC family. Other key parts include the FT232RL. By type, the board carries 13 capacitors, 7 resistors, 6 connectors, 4 test points, 4 diodes and 2 ICs.

From the project

All documentation of the Laser Arcade Project

Main components on the Laser Arcade Master

PIC16F1788-IPFT232RL

Laser Arcade Master bill of materials (BOM)

37 components, 22 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
PIC16F1788-IP
U1
1
FT232RL
U2
1
+5V
J1
1
ICSP
J2
3
I2C
J3, J4, J5
1
USB_B_Mini
J6
4
~
TP1, TP2, TP3, TP4
1
PWR LED
D1
1
1N4148
D2
1
TX
D3
1
RX
D4
1
2UH
2uH
L1
3
220UF
220uF
C1, C2, C6
4
0.1UF
0.1uF
C3, C7, C8, C13
2
1UF
1uF
C4, C5
1
10NF
10nF
C9
2
47PF
47pF
C10, C11
1
4.7UF
4.7uF
C12
1
4.7kΩ
R1
2
10kΩ
R2, R7
Show 2 more
QtyPartRefs
2
220Ω
R3, R4
2
3.3kΩ
R5, R6

Laser Arcade Master design files

The KiCad project lives in the AlexWheelock/Laser-Arcade-Project repository on GitHub; these links point at the commit this page was built from.

Laser Arcade Master: common questions

What microcontroller does the Laser Arcade Master use?

The Laser Arcade Master is built around the PIC16F1788-IP, from the PIC family.

How big is the Laser Arcade Master PCB?

The Laser Arcade Master measures 76.2 × 50.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Laser Arcade Master?

37 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Laser Arcade Master design files?

From the AlexWheelock/Laser-Arcade-Project repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Laser Arcade Master design in my own project?

The repository has no license, so all rights stay with AlexWheelock. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Laser Arcade Master without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.

More boards in Laser-Arcade-Project

Similar boards