Motor can power hub rev a

aliahumanoid·alia-humanoid-core·hardware/electronics/motor_can_power_hub_rev_a/motor_can_power_hub_rev_a.kicad_pcb

Motor can power hub rev a PCB layout, top view — open source board by aliahumanoid

About the Motor can power hub rev a PCB

Motor can power hub rev a is an open source PCB design by aliahumanoid, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 43 × 20 mm, with 7 components from 3 distinct parts.

It belongs with the robotics & motion designs in this gallery.

From the project

Humanoid research project (Phase 0): firmware, host software, STL files and electronics for tendon-driven joints inside real human proportions. GPLv3 software, CC BY-NC-ND hardware files.

Board functions: - Receive CAN bus from jointcontroller via 3-pin screw terminal (GND, CANL, CANH) - Receive 24V power via XT60 (same family used on jointcontroller) - Distribute power/CAN harness to 5 motor ports (6-pin each)

Verified manufacturing BOM: - BOMfabrication.csv`

Included lines: 1. JPWRIN1 -> AMASS XT60PW-M (THT) 2. JCANIN1 -> Phoenix Contact 1725669 (THT) 3. JMOTOR1-JMOTOR5 -> JST B6B-ZR(LF)(SN) (THT)

Motor can power hub rev a bill of materials (BOM)

7 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Conn_01x03
J_CAN_IN1
5
JST
J_MOTOR1, J_MOTOR2, J_MOTOR3, J_MOTOR4, J_MOTOR5
1
Conn_01x02_Pin
J_PWR_IN1

Motor can power hub rev a design files

The KiCad project lives in the aliahumanoid/alia-humanoid-core repository on GitHub; these links point at the commit this page was built from.

Motor can power hub rev a: common questions

How big is the Motor can power hub rev a PCB?

The Motor can power hub rev a measures 43 × 20 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Motor can power hub rev a?

7 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Motor can power hub rev a design files?

From the aliahumanoid/alia-humanoid-core repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Motor can power hub rev a design in my own project?

Yes, under the terms of its GPL-3.0 license, which aliahumanoid chose for the repository.

More boards in alia-humanoid-core

Similar boards