Joint controller board rev d logic
aliahumanoid·alia-humanoid-core·hardware/electronics/joint_controller_board/rev_d_logic/joint_controller_board_rev_d_logic.kicad_pcb
About the Joint controller board rev d logic
Joint controller board rev d logic is an open source RP2040/RP2350 PCB design by aliahumanoid, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 40 × 60 mm, with 43 components from 21 distinct parts.
Its main chip is the PPTC201LFBN-RC, from the RP2040/RP2350 family. Other key parts include the SN74LVC2G08DCUR. By type, the board carries 5 resistors, 2 ICs, 2 crystals, 2 connectors, 2 diodes and 2 capacitors.
It belongs with the robotics & motion and dev boards & breakouts designs in this gallery.
From the project
Humanoid research project (Phase 0): firmware, host software, STL files and electronics for tendon-driven joints inside real human proportions. GPLv3 software, CC BY-NC-ND hardware files.
Status: Current public controller board release Board size: 60 mm x 40 mm Tool baseline: KiCad 9.0.7
revdlogic is the controller logic board currently exposed in the public repository. It is the RP2350-based control board that interfaces with motors, CAN, safety signals, and the external encoder hub.
- RP2350 Pico 2 host module - Two onboard CAN channels (CAN1, CAN2) implemented with MCP2515 + SN65HVD230 - RJ45 interface connector for power/safety breakout - RJ45 encoder connector compatible with MT6835hubreva` - KiCad source, BOM, board setup rules, and current PCB fabrication package
Main components on the Joint controller board rev d logic
Joint controller board rev d logic bill of materials (BOM)
43 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PPTC201LFBN-RC Pico Sullins / Equivalent | RaspberryPi_Pico_Common_THT | U1 |
| 1 | SN74LVC2G08DCUR SN74LVC2G08 Texas Instruments | VSSOP-8_2.4x2.1mm_P0.5mm | U4 |
| 2 | 8MHz SOSET / Equivalent | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1, Y2 |
| 1 | RJHSE5380 J_IFACE Amphenol ICC | RJ45_Amphenol_RJHSE5380 | J1 |
| 1 | RJHSE5380 J_ENCODERS Amphenol ICC | RJ45_Amphenol_RJHSE5380 | J2 |
| 2 | 1uF | C_0805_2012Metric | C_CAN1_BULK1, C_CAN2_BULK2 |
| 4 | 18pF | C_0805_2012Metric | C_CAN1_OSC1, C_CAN1_OSC2, C_CAN2_OSC3, C_CAN2_OSC4 |
| 4 | 100nF | C_0805_2012Metric | C_CAN1_TRX1, C_CAN1_VDD1, C_CAN2_TRX2, C_CAN2_VDD2 |
| 1 | D_PWR | D_SMA | D_PWR1 |
| 2 | ~ | TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal | J_CAN1_IN1, J_CAN2_IN2 |
| 2 | 0 | R_0805_2012Metric | R_CAN1_RS1, R_CAN2_RS2 |
| 2 | 10k | R_0805_2012Metric | R_CAN1_RST1, R_CAN2_RST2 |
| 2 | 22 | R_0805_2012Metric | R_SO_SPI1, R_SO_SPI2 |
| 2 | 120 | R_0805_2012Metric | R_TERM_CAN1, R_TERM_CAN2 |
| 2 | Jumper_2_Open | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | SJ_TERM_CAN1, SJ_TERM_CAN2 |
| 2 | MCP2515-xSO | SOIC-18W_7.5x11.6mm_P1.27mm | U_CAN1, U_CAN2 |
| 2 | SN65HVD230 | SOIC-8_3.9x4.9mm_P1.27mm | U_TRX1, U_TRX2 |
| 1 | MAX6369 | SOT-23-8 | U_WDT1 |
| 2 | PESD2CAN24XLT-Q Nexperia | SOT-23 | D1, D2 |
| 2 | CL21B104KBCNNNC 100nF Samsung | C_0805_2012Metric | C2, C6 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | RC0805FR-0710KL 10k Yageo | R_0805_2012Metric | R1, R2, R3, R4, R5 |
Joint controller board rev d logic design files
The KiCad project lives in the aliahumanoid/alia-humanoid-core repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/electronics/joint_controller_board/rev_d_logic/joint_controller_board_rev_d_logic.kicad_pcb
- Schematichardware/electronics/joint_controller_board/rev_d_logic/joint_controller_board_rev_d_logic.kicad_sch
- BOMhardware/electronics/joint_controller_board/rev_d_logic/BOM_fabrication_combined.csv
Joint controller board rev d logic: common questions
What microcontroller does the Joint controller board rev d logic use?
The Joint controller board rev d logic is built around the PPTC201LFBN-RC, from the RP2040/RP2350 family.
How big is the Joint controller board rev d logic?
The Joint controller board rev d logic measures 40 × 60 mm, has 2 copper layers and is 1.67 mm thick.
How many components are on the Joint controller board rev d logic?
43 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Joint controller board rev d logic design files?
From the aliahumanoid/alia-humanoid-core repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Joint controller board rev d logic design in my own project?
Yes, under the terms of its GPL-3.0 license, which aliahumanoid chose for the repository.
Can I test firmware for the Joint controller board rev d logic without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in alia-humanoid-core
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k