Joint controller board rev d power
aliahumanoid·alia-humanoid-core·hardware/electronics/joint_controller_board/rev_d_power/joint_controller_board_rev_d_power.kicad_pcb
About the Joint controller board rev d power
Joint controller board rev d power is an open source PCB design by aliahumanoid, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 40 × 60 mm, with 40 components from 30 distinct parts.
Other key parts include the TPS2492PW, LMR36520ADDAR and TLV75533PDBVR. By type, the board carries 15 resistors, 14 capacitors, 3 ICs, 3 connectors, 2 transistors and 2 diodes.
It belongs with the robotics & motion designs in this gallery.
From the project
Humanoid research project (Phase 0): firmware, host software, STL files and electronics for tendon-driven joints inside real human proportions. GPLv3 software, CC BY-NC-ND hardware files.
Power board for split Rev D architecture (40 mm x 60 mm).
Reference documents: - ../docs/revdarchitecture.md - ARCHITECTURE.md - COMPONENTSELECTION.md - revdpowerparts.kicadsym`
Status: - KiCad project files refreshed from revdlogic on 2026-04-13 - redesign target remains 24V input domain - .kicadpro, rules, symbol table, and supporting project files are aligned to the revdlogic template - ARCHITECTURE.md is the authoritative design direction for the new power board - current schematic draft now includes: - RJ45 interface connector with frozen split-architecture pinout - XT60 raw input: J2…
Main components on the Joint controller board rev d power
Joint controller board rev d power bill of materials (BOM)
40 components, 30 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS2492PW Texas Instruments | TSSOP-14_4.4x5mm_P0.65mm | U1 |
| 1 | LMR36520ADDAR LMR36520ADDA Texas Instruments | Texas_HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.4x3.1mm_ThermalVias | U2 |
| 1 | TLV75533PDBVR TLV75533PDBV Texas Instruments | SOT-23-5 | U3 |
| 2 | BSC016N06NSATMA1 BSC016N06NS Infineon | TDSON-8-1 | Q1, Q2 |
| 1 | RJHSE-5380 J_IFACE Amphenol Commercial Products | RJ45_Amphenol_RJHSE5380 | J1 |
| 1 | XT60PW-F J_PWR_IN_RAW AMASS | AMASS_XT60PW-F_1x02_P7.20mm_Horizontal | J2 |
| 1 | XT60PW-M J_PWR_OUT_SW AMASS | AMASS_XT60PW-M_1x02_P7.20mm_Horizontal | J4 |
| 1 | SMCJ33A Littelfuse | D_SMC | D1 |
| 1 | SS56B-HF Comchip Technology | D_SMB | D2 |
| 1 | SRP5030T-150M 15uH Bourns | L_Bourns_SRP5030T | L1 |
| 2 | 22uF | C_1210_3225Metric | C1, C9 |
| 1 | CL21B104KBCNNNC 100nF Samsung | C_0805_2012Metric | C2 |
| 1 | 22uF | C_0805_2012Metric | C3 |
| 2 | 1uF | C_0805_2012Metric | C4, C7 |
| 3 | 100nF | C_0805_2012Metric | C5, C8, C24 |
| 1 | CL21B104KBCNNNC 4u7 Samsung | C_1210_3225Metric | C6 |
| 3 | 10nF | C_0805_2012Metric | C11, C21, C22 |
| 1 | 470pF | C_0805_2012Metric | C23 |
| 1 | RC0805FR-0710KL 100k Yageo | R_0805_2012Metric | R1 |
| 2 | RC0805FR-0710KL 10k Yageo | R_0805_2012Metric | R2, R3 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | WSR31L500FEA 1.5mOhm Vishay Dale | R_Shunt_Vishay_WSR2_WSR3_KelvinConnection | R4 |
| 1 | RC0805FR-0710KL 10R Yageo | R_0805_2012Metric | R5 |
| 1 | 47k | R_0805_2012Metric | R6 |
| 1 | 100k | R_0805_2012Metric | R8 |
| 1 | 24k9 | R_0805_2012Metric | R9 |
| 1 | 0R | R_0805_2012Metric | R10 |
| 2 | 82k | R_0805_2012Metric | R11, R21 |
| 2 | 8.2k | R_0805_2012Metric | R12, R22 |
| 1 | 220k | R_0805_2012Metric | R31 |
| 1 | 10k | R_0805_2012Metric | R32 |
Joint controller board rev d power design files
The KiCad project lives in the aliahumanoid/alia-humanoid-core repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/electronics/joint_controller_board/rev_d_power/joint_controller_board_rev_d_power.kicad_pcb
- Schematichardware/electronics/joint_controller_board/rev_d_power/joint_controller_board_rev_d_power.kicad_sch
- BOMhardware/electronics/joint_controller_board/rev_d_logic/BOM_fabrication_combined.csv
Joint controller board rev d power: common questions
How big is the Joint controller board rev d power?
The Joint controller board rev d power measures 40 × 60 mm, has 2 copper layers and is 1.67 mm thick.
How many components are on the Joint controller board rev d power?
40 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Joint controller board rev d power design files?
From the aliahumanoid/alia-humanoid-core repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Joint controller board rev d power design in my own project?
Yes, under the terms of its GPL-3.0 license, which aliahumanoid chose for the repository.
More boards in alia-humanoid-core
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979