HardLabs

Teknofest-Drone-AramaKurtarma

alikerem120215·Teknofest-Drone-AramaKurtarma·gerber_pack/board.kicad_pcb

Teknofest-Drone-AramaKurtarma PCB layout, top view — open source ESP32 board by alikerem120215
Simulate this board

About the Teknofest-Drone-AramaKurtarma PCB

Teknofest-Drone-AramaKurtarma is an open source ESP32 PCB design by alikerem120215, published on GitHub. It is a 2-layer board measuring 75 × 50 mm, with 17 components from 12 distinct parts.

Its main chip is the ESP32-WROOM-32E, from the ESP32 family. Other key parts include the Ra-02 LoRa Module, NEO-6M GPS Module, AMS1117-3.3 and TP4056. By type, the board carries 5 ICs, 5 capacitors, 3 resistors, 2 connectors and 2 switches.

It belongs with the rf & radio, robotics & motion and iot & wireless designs in this gallery.

From the project

DJI Mini Drone Enkaz Altı Arama-Kurtarma Taşıyıcı Kartı (ESP32-LoRa-GPS Donanım Tasarımı)

Bu proje; deprem ve afet durumlarında enkaz altı arama-kurtarma çalışmalarına destek vermek üzere DJI Mini Drone platformuna entegre edilebilir ESP32, LoRa ve GPS tabanlı donanım taşıyıcı kart tasarımını içerir.

Main components on the Teknofest-Drone-AramaKurtarma

ESP32-WROOM-32ERa-02 LoRa ModuleNEO-6M GPS ModuleAMS1117-3.3TP4056

Teknofest-Drone-AramaKurtarma bill of materials (BOM)

17 components, 12 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-WROOM-32E
U1
1
Ra-02 LoRa Module
U2
1
NEO-6M GPS Module
U3
1
AMS1117-3.3
3.3V
U4
1
TP4056
1S LiPo Charger
U5
1
Battery
J1
1
UART0
J2
1
ESP_EN_RESET
SW1
1
ESP_BOOT_MODE
SW2
2
10UF
10uF
C1, C2
3
100NF
100nF
C3, C4, C5
3
10K
10k
R1, R2, R3

Teknofest-Drone-AramaKurtarma design files

The KiCad project lives in the alikerem120215/Teknofest-Drone-AramaKurtarma repository on GitHub; these links point at the commit this page was built from.

Teknofest-Drone-AramaKurtarma: common questions

What microcontroller does the Teknofest-Drone-AramaKurtarma use?

The Teknofest-Drone-AramaKurtarma is built around the ESP32-WROOM-32E, from the ESP32 family.

How big is the Teknofest-Drone-AramaKurtarma PCB?

The Teknofest-Drone-AramaKurtarma measures 75 × 50 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Teknofest-Drone-AramaKurtarma?

17 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Teknofest-Drone-AramaKurtarma design files?

From the alikerem120215/Teknofest-Drone-AramaKurtarma repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Teknofest-Drone-AramaKurtarma design in my own project?

The repository has no license, so all rights stay with alikerem120215. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Teknofest-Drone-AramaKurtarma without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards