Chronopixel
alphaseneca·chronopixel-pcb
About the Chronopixel PCB
Chronopixel is an open source ESP8266 PCB design by alphaseneca, published on GitHub under the MIT license. It is a 2-layer board measuring 56 × 106 mm, with 46 components from 26 distinct parts.
Its main chip is the ESP-12F(ESP8266MOD), from the ESP8266 family. Other key parts include the SZ421288N/64, TYPE-C 16P LTH6.8, MAX7219EWG+T, BQ24075RGTR and BMI323. By type, the board carries 16 resistors, 13 capacitors, 10 ICs, 2 connectors, 2 diodes and 1 transistor.
It belongs with the power & battery, sensors and iot & wireless designs in this gallery.
From the project
Hardware design and KiCad PCB files for the ChronoPixel smart matrix desk clock.
Hardware design repository for ChronoPixel — an open-source, gravity-sensing digital sand timer and smart pixel hourglass. Contains the KiCad schematics, PCB layout, manufacturing outputs, and assembly files.
The PCB is architected specifically around the physical interactions of a traditional hourglass:
1. Dual Hourglass Chambers (Dual MAX7219 + 2× 8×8 LED Matrices): The two stacked LED matrices represent the upper and lower bulbs of the hourglass. Individual pixel "sand grains" trickle through the center constriction from the top chamber to accumulate in the bottom chamber. 2. Gravity &…
Main components on the Chronopixel
Chronopixel bill of materials (BOM)
46 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | SZ421288N/64 ARKLED | LED-SEG-TH_SZ421288N-64 | U1, U2 |
| 1 | TYPE-C 16P LTH6.8 SHOU HAN | USB-C-SMD_TYPE-C-16P-LTH6.8 | U3 |
| 2 | MAX7219EWG+T MAXIM | SOIC-24_L15.4-W7.5-P1.27-LS10.3-BL | U4, U5 |
| 1 | BQ24075RGTR TI | QFN-16_L3.0-W3.0-P0.50-TL-EP1.7 | U6 |
| 1 | ESP-12F(ESP8266MOD) ESP-12F Ai-Thinker | ESP-12E | U7 |
| 1 | BMI323 Bosch | LGA-14_L3.0-W2.5-P0.50-TL_QMI8658A | U8 |
| 1 | TLV73333PDBVR TI | SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BR | U9 |
| 1 | BM06B-SRSS-TB(LF)(SN) PRG JST | CONN-SMD-6P-P1.00_BM06B-SRSS-TB-LF-SN | U10 |
| 1 | AO3400A AO3480C AOS | SOT-23 | Q1 |
| 1 | BM04B-SRSS-TB(LF)(SN) USB JST | CONN-SMD_BM04B-SRSS-TB | CN1 |
| 1 | SM02B-SRSS-TB(LF)(SN) BATT JST | CONN-SMD_2P-P1.00_SM02B-SRSS-TB-LF-SN | CN2 |
| 1 | MLT-7525 Huaneng | BUZ-SMD_4P-L7.5-W7.5-P7.59-TL | BUZZER1 |
| 1 | B3U-1000P OMRON | KEY-SMD_B3U-1000PM | SW1 |
| 1 | XL-1608SURC-06 RED XINGLIGHT | LED_0603_1608Metric | D1 |
| 1 | XL-1608UGC-04 GREEN XINGLIGHT | LED_0603_1608Metric | D2 |
| 2 | CL21A475KAQNNNE 4u7 Samsung Electro-Mechanics | C_0805_2012Metric | C1, C8 |
| 6 | CL10B104KB8NNNC 100n Samsung Electro-Mechanics | C_0603_1608Metric | C2, C3, C7, C9, C11, C12 |
| 2 | CL21A226MAYNNNE 22u Samsung Electro-Mechanics | C_0805_2012Metric | C4, C5 |
| 1 | CL21A106KAYNNNE 10u Samsung Electro-Mechanics | C_0805_2012Metric | C6 |
| 2 | CL21B105KBFNNNE 1u Samsung Electro-Mechanics | C_0805_2012Metric | C10, C13 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | RC0603FR-075K1L 5K1 YAGEO | R_0603_1608Metric | R1, R2 |
| 6 | RC0603FR-0710KL 10K YAGEO | R_0603_1608Metric | R3, R9, R12, R13, R14, R16 |
| 3 | R | R_0603_1608Metric | R4, R5, R6 |
| 2 | RC0603FR-0728KL 28K YAGEO | R_0603_1608Metric | R7, R8 |
| 2 | RC0603FR-071K5L 1K5 YAGEO | R_0603_1608Metric | R10, R11 |
| 1 | RC0603FR-07100RL 100R YAGEO | R_0603_1608Metric | R15 |
Chronopixel design files
The KiCad project lives in the alphaseneca/chronopixel-pcb repository on GitHub; these links point at the commit this page was built from.
- Layoutchronopixel-pcb.kicad_pcb
- Schematicchronopixel-pcb.kicad_sch
Chronopixel: common questions
What microcontroller does the Chronopixel use?
The Chronopixel is built around the ESP-12F(ESP8266MOD), from the ESP8266 family.
How big is the Chronopixel PCB?
The Chronopixel measures 56 × 106 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Chronopixel?
46 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the Chronopixel design files?
From the alphaseneca/chronopixel-pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Chronopixel design in my own project?
Yes, under the terms of its MIT license, which alphaseneca chose for the repository.
Can I test firmware for the Chronopixel without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
Similar boards
ESP8266
ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1kESP8266
HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738ESP8266
RatGDO-OpenSource-Bare-ESP8266
Kaldek
55 × 82.7 mm20 parts2LMIT506ESP8266
Goatgdo
Kaldek
32.9 × 53.3 mm23 parts2LMIT506ESP8266
RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506ESP8266
Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398