Balancio board

alvgaona·balancio-board·hw/balancio.kicad_pcb

Balancio board layout, top view — open source ESP32 board by alvgaona

About the Balancio board

Balancio board is an open source ESP32 PCB design by alvgaona, published on GitHub. It is a 2-layer board measuring 70 × 70 mm, with 42 components from 25 distinct parts.

Its main chip is the ESP32-DEVKIT-V1, from the ESP32 family. Other key parts include the MPU-6050, DRV8833CPWPR and HY2120-AB. By type, the board carries 14 resistors, 10 capacitors, 7 connectors, 4 ICs, 4 transistors and 1 switch.

It belongs with the robotics & motion and sensors designs in this gallery.

From the project

Controller board for the Balancio self-balancing robot.

Controller board for the Balancio self-balancing robot.

The board carries the robot's brains, motor drive and power.

- ESP32 DevKit - DRV8833 dual motor driver - MPU-6050 IMU - 2S battery protection - Soft-latch power switch, with the power button on the left edge

Rev 1.0 was built by JLCPCB and works. Rev 1.1 replaces its slide switch with the soft latch.

- hw/: the design, edited in KiCad 10. This is the source of truth. - balancio.kicadsch, balancio.kicadpcb: schematic and board. - lib/: the board's own symbols, footprints and the 3D models KiCad doesn't ship (balancio.3dshapes/). -…

Main components on the Balancio board

Balancio board bill of materials (BOM)

42 components, 25 distinct parts.

QtyPartRefs
1
MPU-6050
TDK InvenSense
IC1
1
ESP32-DEVKIT-V1
Espressif Systems
U1
1
DRV8833CPWPR
TI(德州仪器)
U2
1
HY2120-AB
HYCON Tech
U3
2
AP8205A
ALLPOWER(铨力)
Q1, Q2
1
AO4407A
Alpha & Omega
Q3
1
2N7002
Jiangsu Changjing
Q4
2
B2B-PH-K-S(LF)(SN)
JST Sales America
J1, J2
4
B4B-PH-K-S(LF)(SN)
JST Sales America Inc.
J3, J5, J6, J7
1
B3B-XH-A(LF)(SN)
JST Sales America Inc.
J4
1
SKRTLAE010
Alps Alpine
SW2
1
5060BRG4
Yetda Industry
LED1
1
BAT54C,215
BAT54C
Nexperia
D1
1
2.2nF
C1
5
100nF
C2, C3, C8, C9, C10
2
10nF
C4, C6
1
2.2uF
C5
1
CA45-B-25V-10uF-M
10uF
CEC(振华新云)
C7
3
4.7kΩ
R1, R2, R3
3
100Ω
R4, R5, R6
Show 5 more
QtyPartRefs
2
330Ω
R7, R8
1
2kΩ
R9
3
100kΩ
R10, R11, R13
1
10kΩ
R12
1
33kΩ
R14

Balancio board design files

The KiCad project lives in the alvgaona/balancio-board repository on GitHub; these links point at the commit this page was built from.

Balancio board: common questions

What microcontroller does the Balancio board use?

The Balancio board is built around the ESP32-DEVKIT-V1, from the ESP32 family.

How big is the Balancio board?

The Balancio board measures 70 × 70 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Balancio board?

42 components, from 25 distinct parts. The full bill of materials is listed on this page.

Where can I download the Balancio board design files?

From the alvgaona/balancio-board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Balancio board design in my own project?

The repository has no license, so all rights stay with alvgaona. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Balancio board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards