Aeolus

am0ghh·Aeolus·hardware/Aeolus.kicad_pcb

Aeolus PCB layout, top view — open source ESP32 board by am0ghh

About the Aeolus PCB

Aeolus is an open source ESP32 PCB design by am0ghh, published on GitHub under the MIT license. It is a 4-layer board measuring 53.3 × 45.7 mm, with 11 components from 10 distinct parts.

Its main chip is the ESP32 - C3, from the ESP32 family. By type, the board carries 3 resistors, 2 connectors, 2 diodes, 1 IC, 1 transistor and 1 switch.

It belongs with the iot & wireless, displays & leds and sensors designs in this gallery.

From the project

Aeolus is a smart, temperature-aware IR fan controller built around an ESP32-C3. It watches room temperature and automatically turns a WOOZOO (or other NEC-protocol) fan on and off over infrared, with a 0.96" OLED status display, a physical control button, and an on-device IR "le

Aeolus is a smart, temperature-aware IR fan controller built around an ESP32-C3. It watches room temperature and automatically turns a WOOZOO (or other NEC-protocol) fan on and off over infrared, with a 0.96" OLED status display, a physical control button, and an on-device IR "learn" mode for capturing new remote codes — all on a custom-designed 4-layer PCB.

Aeolus, from the project README
From the project README

Main components on the Aeolus

Aeolus bill of materials (BOM)

11 components, 10 distinct parts.

QtyPartRefs
1
ESP32 - C3
U1
1
PN2222
Q1
1
IR Receiver
J1
1
OLED Display
J2
1
SW_Push
SW1
1
Thermistor
TH1
2
LED
D1, D2
1
220
R1
1
10
R2
1
10k
R3

Aeolus design files

The KiCad project lives in the am0ghh/Aeolus repository on GitHub; these links point at the commit this page was built from.

Aeolus: common questions

What microcontroller does the Aeolus use?

The Aeolus is built around the ESP32 - C3, from the ESP32 family.

How big is the Aeolus PCB?

The Aeolus measures 53.3 × 45.7 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Aeolus?

11 components, from 10 distinct parts. The full bill of materials is listed on this page.

Where can I download the Aeolus design files?

From the am0ghh/Aeolus repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Aeolus design in my own project?

Yes, under the terms of its MIT license, which am0ghh chose for the repository.

Can I test firmware for the Aeolus without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards