ESP32-Based OrthoStatic-Hypotension Monitoring Device
amajha2166·ESP32-Based_OrthoStatic-Hypotension_Monitoring_Device·KiCAD Files/Postural_Health_Band.kicad_pcb
About the ESP32-Based OrthoStatic-Hypotension Monitoring Device PCB
ESP32-Based OrthoStatic-Hypotension Monitoring Device is an open source ESP32 PCB design by amajha2166, published on GitHub. It is a 2-layer board measuring 11.6 × 16 mm, with 5 components from 5 distinct parts.
Its main chip is the ESP32-C6-MINI-1, from the ESP32 family. Other key parts include the MAX30102, MPU-6050 and TP4056-42-ESOP8. By type, the board carries 4 ICs and 1 battery holder.
It belongs with the iot & wireless, wearables and power & battery designs in this gallery.
From the project
An ESP32-based wearable monitoring prototype integrating MAX30102 heart-rate and SpO₂ sensing, MPU6050 posture detection, Qt GUI visualization, Wi-Fi communication, event-based alerts, and KiCad hardware design.
An embedded physiological monitoring prototype integrating ESP32, MAX30102, MPU6050, Qt/QML, Wi-Fi communication, FreeRTOS-based notification handling, and KiCad hardware design.
The project combines heart-rate and SpO₂ estimation, posture classification, resting-baseline acquisition, standing-response monitoring, and event-based alerts in a connected monitoring platform.
Main components on the ESP32-Based OrthoStatic-Hypotension Monitoring Device
ESP32-Based OrthoStatic-Hypotension Monitoring Device bill of materials (BOM)
5 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX30102 | Maxim_OLGA-14_3.3x5.6mm_P0.8mm | U2 |
| 1 | MPU-6050 | InvenSense_QFN-24_4x4mm_P0.5mm | U3 |
| 1 | ESP32-C6-MINI-1 | ESP32-C6-MINI-1 | U4 |
| 1 | TP4056-42-ESOP8 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | U5 |
| 1 | Battery_Cell | PinHeader_1x02_P2.54mm_Vertical | BT1 |
ESP32-Based OrthoStatic-Hypotension Monitoring Device design files
The KiCad project lives in the amajha2166/ESP32-Based_OrthoStatic-Hypotension_Monitoring_Device repository on GitHub; these links point at the commit this page was built from.
ESP32-Based OrthoStatic-Hypotension Monitoring Device: common questions
What microcontroller does the ESP32-Based OrthoStatic-Hypotension Monitoring Device use?
The ESP32-Based OrthoStatic-Hypotension Monitoring Device is built around the ESP32-C6-MINI-1, from the ESP32 family.
How big is the ESP32-Based OrthoStatic-Hypotension Monitoring Device PCB?
The ESP32-Based OrthoStatic-Hypotension Monitoring Device measures 11.6 × 16 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP32-Based OrthoStatic-Hypotension Monitoring Device?
5 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the ESP32-Based OrthoStatic-Hypotension Monitoring Device design files?
From the amajha2166/ESP32-Based_OrthoStatic-Hypotension_Monitoring_Device repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ESP32-Based OrthoStatic-Hypotension Monitoring Device design in my own project?
The repository has no license, so all rights stay with amajha2166. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ESP32-Based OrthoStatic-Hypotension Monitoring Device without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k