Battery charging
About the Battery charging PCB
Battery charging is an open source PCB design by amaraoussama94, published on GitHub. It is a 2-layer board measuring 119.4 × 78.7 mm, with 16 components from 13 distinct parts.
Other key parts include the MCP73831-2-OT and TPS61200DRC. By type, the board carries 5 capacitors, 4 resistors, 2 ICs, 1 transistor, 1 connector and 1 battery holder.
It belongs with the power & battery designs in this gallery.
From the project
KiCad project
Main components on the Battery charging
Battery charging bill of materials (BOM)
16 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP73831-2-OT | SOT-23-5 | U1 |
| 1 | TPS61200DRC | Texas_S-PVSON-N10_ThermalVias | U2 |
| 1 | Q_PMOS_DGS | SuperSOT-3 | Q1 |
| 1 | USB_B_Mini | USB_Mini-B_Lumberg_2486_01_Horizontal | J1 |
| 1 | Battery_Cell | BatteryHolder_Eagle_12BH611-GR | BT1 |
| 1 | D_Schottky | D_5W_P12.70mm_Horizontal | D1 |
| 1 | 2.2uH | L_Axial_L14.0mm_D4.5mm_P7.62mm_Vertical_Fastron_LACC | L1 |
| 3 | 4.7uF | CP_Elec_4x4.5 | C1, C2, C3 |
| 1 | 1uF | CP_Elec_3x5.3 | C4 |
| 1 | 22uF | CP_Elec_6.3x5.2 | C5 |
| 2 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 1 | 2M | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 180K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
Battery charging design files
The KiCad project lives in the amaraoussama94/Battery-charging repository on GitHub; these links point at the commit this page was built from.
Battery charging: common questions
How big is the Battery charging PCB?
The Battery charging measures 119.4 × 78.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Battery charging?
16 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Battery charging design files?
From the amaraoussama94/Battery-charging repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Battery charging design in my own project?
The repository has no license, so all rights stay with amaraoussama94. Use it as a reference, and ask the author before reusing the design.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k