10 open source boards using the TPS61200DRC
Real designs built with the TPS61200DRC, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXP
Horizon
Horizon-Avionics
68.8 × 90.3 mm168 parts4LNo license17RP2040/RP2350
SAO Demo Controller
ageppert
38.1 × 50.8 mm50 parts2LMIT3ESP32
PGR
Projeto-Guarda-Rios
67.5 × 44.4 mm75 parts4LMIT2Battery charging
amaraoussama94
119.4 × 78.7 mm16 parts2LNo license1ESP32
ESP32-C3-Low-Power-IoT-Plant-Node
mohamed-sebbar
59.5 × 29.9 mm65 parts4LCERN-OHL-W-2.00ESP8266
ESP8266-Cherry-MX-Board
hampussandberg
33 × 90 mm59 parts2LNo license0Portable-Arduino-UNO-Shield
DariusSasarman
91.6 × 53.3 mm29 parts2LNo license0Microchip SAM
SamdFlightController
crnicholson
42 × 87.9 mm106 parts4LNo license24ESP32
FLP PCB host
DSM-Interrupt
90 × 90.5 mm92 parts2LNo license0STM32
FLP PCB terminal
DSM-Interrupt
80 × 80 mm79 parts4LNo license0
How designs wire the TPS61200DRC
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the TPS61200DRC connects to, and the resistors, capacitors and other passives placed on it.
- The L pin has a inductor on 9 of 9 designs, most often 2.2 µH.
- The VIN pin has a inductor on 9 of 9 designs, most often 2.2 µH.
- The VAUX pin has a capacitor to GND on 8 of 9 designs, most often 1 µF (then 100 nF).
- The VOUT pin has a capacitor to GND on 7 of 9 designs, most often 10 µF (then 22 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VAUXpin 1 | Connected to: Signal 100% |
|
| VOUTpin 2 | Connected to: Signal 56% · 5V 44% |
|
| Lpin 3 | Connected to: Signal 100% |
|
| PGNDpin 4 | Connected to: GND 89% | — |
| VINpin 5 | Connected to: Signal 67% · BATT 33% |
|
| ENpin 6 | Connected to: Signal 67% · BATT 33% |
|
| UVLOpin 7 | Connected to: Signal 100% |
|
| PSpin 8 | Connected to: Signal 78% |
|
| GNDpin 9 | Connected to: GND 89% | — |
| FBpin 10 | Connected to: Signal 67% · 5V 22% |
|
| PADpin 11 | Connected to: GND 78% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SamdFlightController by crnicholson, Horizon by Horizon-Avionics, SAO Demo Controller by ageppert and PGR by Projeto-Guarda-Rios.
The TPS61200DRC in open source designs
The gallery holds 10 open source boards using the TPS61200DRC from 9 GitHub repositories; a typical one measures about 68.2 × 79.4 mm and carries around 70 components.
50% are two-layer designs, the rest use four layers or more, and 30% carry an open source license.
The most starred is SamdFlightController by crnicholson.
Parts used alongside the TPS61200DRC
Microcontrollers on boards using the TPS61200DRC
What boards using the TPS61200DRC are built for
TPS61200DRC: common questions
Where can I find a TPS61200DRC reference design?
Each of the 10 boards on this page is a real design using the TPS61200DRC. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TPS61200DRC L pin connected?
The L pin has a inductor on 9 of 9 designs, most often 2.2 µH. Counted from the KiCad layouts of 9 open source designs using the TPS61200DRC.
How is the TPS61200DRC VIN pin connected?
The VIN pin has a inductor on 9 of 9 designs, most often 2.2 µH. Counted from the KiCad layouts of 9 open source designs using the TPS61200DRC.
How is the TPS61200DRC VAUX pin connected?
The VAUX pin has a capacitor to GND on 8 of 9 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 9 open source designs using the TPS61200DRC.
What parts are used alongside the TPS61200DRC?
The MCP73831-2-OT, ESP32-WROOM-32E and USBLC6-2P6 appear in the most repositories here.
Which microcontrollers do boards using the TPS61200DRC use?
Most are built on ESP32 (3), ESP8266 (1), NXP (1) and RP2040/RP2350 (1).
How big is a typical board using the TPS61200DRC?
The median is 68.2 × 79.4 mm, and 50% are two-layer designs.
What is the most popular open source board using the TPS61200DRC?
By GitHub stars, SamdFlightController by crnicholson, with 24 stars.
Can I simulate one of these boards using the TPS61200DRC before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.