HardLabs

Pico w module

amnessa·KiCAD·projects/pico_w_module/pico_w_module.kicad_pcb

Pico w module layout, top view — open source Raspberry Pi board by amnessa

About the Pico w module

Pico w module is an open source Raspberry Pi PCB design by amnessa, published on GitHub. It is a 4-layer board measuring 80 × 50 mm, with 12 components from 9 distinct parts.

Its main chip is the RaspberryPi_Pico_W, from the Raspberry Pi family. Other key parts include the AP2112K-3.3, ICM-20948 and MAX3485. By type, the board carries 4 capacitors, 3 ICs, 2 connectors, 1 module, 1 microphone and 1 resistor.

Main components on the Pico w module

AP2112K-3.3ICM-20948MAX3485RaspberryPi_Pico_W

Pico w module bill of materials (BOM)

12 components, 9 distinct parts.

QtyPartRefs
1
AP2112K-3.3
U1
1
ICM-20948
U2
1
MAX3485
U3
1
RaspberryPi_Pico_W
A1
1
Conn_01x02
J1
1
Conn_01x03
J2
1
INMP441
MK1
4
10MicroFarad
C1, C3, C4, C5
1
120R
R1

Pico w module design files

The KiCad project lives in the amnessa/KiCAD repository on GitHub; these links point at the commit this page was built from.

Pico w module: common questions

What microcontroller does the Pico w module use?

The Pico w module is built around the RaspberryPi_Pico_W, from the Raspberry Pi family.

How big is the Pico w module?

The Pico w module measures 80 × 50 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Pico w module?

12 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pico w module design files?

From the amnessa/KiCAD repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Pico w module design in my own project?

The repository has no license, so all rights stay with amnessa. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Pico w module without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

More boards in KiCAD

Similar boards