Penguin32
amnotpopichu·penguin32·PCB/PCB.kicad_pcb
About the Penguin32 PCB
Penguin32 is an open source ESP32 PCB design by amnotpopichu, published on GitHub under the MPL-2.0 license. It is a 2-layer board measuring 28 × 48.3 mm, with 40 components from 20 distinct parts.
Its main chip is the ESP32-S3FN8, from the ESP32 family. Other key parts include the AMS1117-3.3, H5VU10BB and YZA-056-4.3. By type, the board carries 19 capacitors, 5 ICs, 5 resistors, 4 inductors, 2 connectors and 2 diodes.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
a esp32s3 devboard submitted to outpost by hackclub

Main components on the Penguin32
Penguin32 bill of materials (BOM)
40 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 Advanced Monolithic Systems | SOT-223-3_L6.5-W3.4-P2.30-LS7.0-BR | U1 |
| 1 | H5VU10BB R+O(宏嘉诚) | DFN1006-2L-BI | U2 |
| 2 | YZA-056-4.3 YIZHI(逸致) | SW-SMD_4P-L4.5-W4.5-P3.00-LS6.8 | U3, U4 |
| 1 | ESP32-S3FN8 ESP32-S3 ESPRESSIF(乐鑫) | QFN-56_L7.0-W7.0-P0.40-TL-EP4.0 | U5 |
| 1 | TXM40M0004322HBCEO00T YJX(雅晶鑫) | CRYSTAL-SMD_4P-L3.2-W2.5-BL-2 | X1 |
| 2 | CONN_01X15_PIN Conn_01x15_Pin | PinHeader_1x15_P2.54mm_Vertical | J4, J5 |
| 1 | Antenna_Chip | ESPRESSIF_ESP32_MIFA_2.4GHz_Right | AE2 |
| 1 | TYPE-C-31-M-12 韩国韩荣 | USB-C_SMD-TYPE-C-31-M-12_1 | USBC1 |
| 1 | SMBJ3.3A SMBJ3.3A_C19077556 R+O(宏嘉诚) | SMB_L4.6-W3.6-LS5.3-RD | D3 |
| 1 | 1N5819WS Hottech(合科泰) | SOD-323_L1.8-W1.3-LS2.5-RD | D4 |
| 3 | SDCL1005C2N0STDF Sunlord(顺络) | L0402 | L1, L2, L4 |
| 1 | SDCL1005C24NJTDF Sunlord(顺络) | L0402-RD | L3 |
| 4 | CL10A106MA8NRNC SAMSUNG(三星) | C0603 | C1, C17, C18, C19 |
| 5 | CL05B104KO5NNNC SAMSUNG(三星) | C0402 | C2, C3, C4, C5, C8 |
| 4 | CL10A105KB8NNNC SAMSUNG(三星) | C0603 | C10, C11, C13, C16 |
| 2 | 0402CG220J500NT FH(风华) | C0402 | C14, C15 |
| 4 | GJM1555C1H1R5BB01D muRata(村田) | C0402 | C20, C21, C22, C23 |
| 2 | 0603WAF5101T5E UNI-ROYAL(厚声) | R0603 | R1, R3 |
| 1 | 0402WGF4990TCE UNI-ROYAL(厚声) | R0402 | R2 |
| 2 | 0805W8F1002T5E UNI-ROYAL(厚声) | R0805 | R4, R5 |
Penguin32 design files
The KiCad project lives in the amnotpopichu/penguin32 repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/PCB.kicad_pcb
- SchematicPCB/PCB.kicad_sch
- BOMPCB/production/bom.csv
Penguin32: common questions
What microcontroller does the Penguin32 use?
The Penguin32 is built around the ESP32-S3FN8, from the ESP32 family.
How big is the Penguin32 PCB?
The Penguin32 measures 28 × 48.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Penguin32?
40 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Penguin32 design files?
From the amnotpopichu/penguin32 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Penguin32 design in my own project?
Yes, under the terms of its MPL-2.0 license, which amnotpopichu chose for the repository.
Can I test firmware for the Penguin32 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k