Expresso
amonbenson·expresso·hw/Expresso.kicad_pcb
About the Expresso PCB
Expresso is an open source STM32 PCB design by amonbenson, published on GitHub under the MIT license. It is a 4-layer board measuring 85.3 × 75.7 mm, with 84 components from 33 distinct parts.
Its main chip is the STM32G431CBT6, from the STM32 family. Other key parts include the XC6206P332MR, SRV05-4, 74AHCT1G17GWH, H11L1 and NE5532. By type, the board carries 33 resistors, 27 capacitors, 10 ICs, 8 connectors, 2 switches and 2 diodes.
It belongs with the audio designs in this gallery.
From the project
An open source USB–Midi–Expression pedal converter.
An open source USB–Midi–Expression pedal converter.
⚠️ Please note: This project is currently under heavy development and not yet functional. ⚠️
✔️ Supports sustain pedals of any polarity ✔️ Supports any kind of three-pin analog expression pedal ✔️ Pedal state can be output to both Din- or USB-Midi ✔️ Can be used as a classic USB-Din-Midi adapter
Main components on the Expresso
Expresso bill of materials (BOM)
84 components, 33 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | XC6206P332MR | SOT-23-3 | U1, U2 |
| 1 | STM32G431CBT6 | LQFP-48_7x7mm_P0.5mm | U3 |
| 1 | SRV05-4 | SOT-23-6 | U4 |
| 1 | 74AHCT1G17GWH | SOT-353_SC-70-5 | U5 |
| 1 | H11L1 | SOP-6_6.35x8.51mm_P02.54mm | U6 |
| 4 | NE5532 | NE5532DR | U7, U8, U9, U10 |
| 1 | 16 MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
| 1 | Midi In | DIN5_MIDI_MultiGround | J2 |
| 1 | Midi Out | DIN5_MIDI_MultiGround | J3 |
| 1 | Debug | PinHeader_1x14_P2.54mm_Vertical | J5 |
| 4 | Exp | Jack_6.35mm_Neutrik_NMJ6HFD4_Horizontal | J6, J7, J8, J9 |
| 1 | Reset | SW_PUSH_6mm | SW1 |
| 1 | Boot0 | SW_PUSH_6mm | SW2 |
| 1 | 1N4148WS | D_SOD-323 | D3 |
| 1 | LED_RBK_GBK | LED_D5.0mm_6Pin | D4 |
| 1 | 33Ω@100MHz | L_0805_2012Metric | FB1 |
| 1 | 10n | C_0603_1608Metric | C1 |
| 16 | 100n | C_0603_1608Metric | C2, C8, C9, C11, C12, C13, C14, C17 +8 |
| 1 | 4.7u | C_0603_1608Metric | C3 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 1u | C_0603_1608Metric | C4, C5, C6, C7, C27 |
| 1 | 10u | C_0603_1608Metric | C10 |
| 2 | 12p | C_0603_1608Metric | C15, C16 |
| 1 | 4.7n | C_0603_1608Metric | C19 |
| 5 | 1k | R_0603_1608Metric | R1, R3, R5, R11, R12 |
| 10 | 10k | R_0603_1608Metric | R2, R4, R17, R20, R21, R24, R25, R28 +2 |
| 1 | 2.2k | R_0603_1608Metric | R6 |
| 1 | 1M | R_0603_1608Metric | R7 |
| 2 | 5.1k | R_0603_1608Metric | R8, R9 |
| 3 | 220 | R_0603_1608Metric | R10, R15, R16 |
| 2 | 47 | R_0603_1608Metric | R13, R14 |
| 8 | 100k | R_0603_1608Metric | R18, R19, R22, R23, R26, R27, R30, R31 |
| 1 | 680 | R_0603_1608Metric | R34 |
Expresso design files
The KiCad project lives in the amonbenson/expresso repository on GitHub; these links point at the commit this page was built from.
- Layouthw/Expresso.kicad_pcb
- Schematichw/Expresso.kicad_sch
Expresso: common questions
What microcontroller does the Expresso use?
The Expresso is built around the STM32G431CBT6, from the STM32 family.
How big is the Expresso PCB?
The Expresso measures 85.3 × 75.7 mm, has 4 copper layers and is 1.96 mm thick.
How many components are on the Expresso?
84 components, from 33 distinct parts. The full bill of materials is listed on this page.
Where can I download the Expresso design files?
From the amonbenson/expresso repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Expresso design in my own project?
Yes, under the terms of its MIT license, which amonbenson chose for the repository.
Can I test firmware for the Expresso without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k