HardLabs

TokenKey-RT

anand2532·TokenKey-RT·hardware/schematic/TokenKey-RT.kicad_pcb

TokenKey-RT PCB layout, top view — open source NXP board by anand2532

About the TokenKey-RT PCB

TokenKey-RT is an open source NXP PCB design by anand2532, published on GitHub. It is a 4-layer board measuring 50 × 40 mm, with 93 components from 34 distinct parts.

Its main chip is the MIMXRT1062DVL6B, from the NXP family. Other key parts include the AP2112K-3.3TRG1, TLV62569DBVR, W25Q64JVSSIQ, APS6404L-3SQR-ZR and USBLC6-2SC6. By type, the board carries 53 capacitors, 22 resistors, 6 ICs, 4 switches, 2 crystals and 2 connectors.

From the project

The whole KiCad project for the TokenKey RT board lives here: TokenKey-RT.kicadpro, TokenKey-RT.kicadsch (plus sub-sheets), the 4-layer TokenKey-RT.kicadpcb and TokenKey-RT.kicaddru. KiCad only links the .kicadsch and .kicadpcb that sit next to the .kicadpro`, so keep them togeth

The whole KiCad project for the TokenKey RT board lives here: TokenKey-RT.kicadpro, TokenKey-RT.kicadsch (plus sub-sheets), the 4-layer TokenKey-RT.kicadpcb and TokenKey-RT.kicaddru. KiCad only links the .kicadsch and .kicadpcb that sit next to the .kicadpro`, so keep them together in this folder.

Main components on the TokenKey-RT

MIMXRT1062DVL6BAP2112K-3.3TRG1TLV62569DBVRW25Q64JVSSIQAPS6404L-3SQR-ZRUSBLC6-2SC6

TokenKey-RT bill of materials (BOM)

93 components, 34 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MIMXRT1062DVL6B
U1
1
AP2112K-3.3TRG1
U2
1
TLV62569DBVR
U3
1
W25Q64JVSSIQ
U4
1
APS6404L-3SQR-ZR
U5
1
USBLC6-2SC6
U6
1
AO3401A
Q1
1
X322524MOB4SI
24MHz 12pF
Y1
1
ABS07-32.768KHZ-T
32.768kHz 12.5pF
Y2
1
TYPE-C-31-M-12
USB-C
J1
1
PZ254-1-04-Z-C
Header 1x04 P2.54 H3.0 (OLED)
HCTL
J2
1
B3U-1000P
SW_BOOT
SW1
1
EC11E18244A5
SW2
1
B3U-1000P
BTN1
SW3
1
B3U-1000P
BTN2
SW4
1
KT-0603R
RED
D1
1
SWPA4020S2R2MT
2.2uH
L1
1
VLS3015CX-4R7M-1
4.7uH
TDK
L2
3
CL05A105KA5NQNC
1uF
C1, C26, C28
3
CL10A106KP8NNNC
10uF
C2, C3, C40
Show 14 more
QtyPartRefs
3
CL10A226MQ8NRNC
22uF
C4, C13, C18
12
CL05B104KO5NNNC
100nF
C5, C29, C31, C33, C34, C36, C37, C38 +4
14
CL05A224KA5NNNC
220nF
C6, C7, C8, C9, C10, C14, C15, C16 +6
12
CL05A475MP5NRNC
4.7uF
C11, C12, C17, C20, C22, C25, C30, C32 +4
2
0402CG150J500NT
15pF
C44, C45
2
0402CG180J500NT
18pF
C46, C47
2
CL05B103KB5NNNC
10nF
C52, C53
2
0402WGF1003TCE
100k
R1, R3
1
0402WGF2202TCE
22k
R2
10
0402WGF1002TCE
10k
R4, R6, R7, R8, R10, R16, R17, R18 +2
3
0402WGF1001TCE
1k
R5, R21, R22
2
0402WGF220JTCE
22R
R9, R11
2
0402WGF5101TCE
5.1k
R12, R13
2
0402WGF4701TCE
4.7k
R14, R15

TokenKey-RT design files

The KiCad project lives in the anand2532/TokenKey-RT repository on GitHub; these links point at the commit this page was built from.

TokenKey-RT: common questions

What microcontroller does the TokenKey-RT use?

The TokenKey-RT is built around the MIMXRT1062DVL6B, from the NXP family.

How big is the TokenKey-RT PCB?

The TokenKey-RT measures 50 × 40 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the TokenKey-RT?

93 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the TokenKey-RT design files?

From the anand2532/TokenKey-RT repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the TokenKey-RT design in my own project?

The repository has no license, so all rights stay with anand2532. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the TokenKey-RT without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.

Similar boards