24 open source boards using the APS6404L-3SQR-ZR

Real designs built with the APS6404L-3SQR-ZR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

24 boardsClear filters|Most starred

How designs wire the APS6404L-3SQR-ZR

Read from the KiCad layouts of 15 open source designs, one per repository: what each pin of the APS6404L-3SQR-ZR connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD_8 pin has a decoupling capacitor on 15 of 15 designs, most often 100 nF (then 2.2 µF).
  • The CE pin has a pull-up to 3.3V on 13 of 15 designs, most often 10 kΩ (then 100 kΩ).
CEpin 1Connected to: The microcontroller 80%
  • Pull-up to 3.3V on 87% · 10 kΩ (10), 100 kΩ (3)
VSS_4pin 4Connected to: GND 100%
VDD_8pin 8Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (25), 2.2 µF (5), 1 µF (3)

6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Rp2040-memcard by tschicki, Frank next by rh1tech, SparkFun XRP Controller by sparkfun and Board gw1 24 by andrastantos.

The APS6404L-3SQR-ZR in open source designs

The gallery holds 24 open source boards using the APS6404L-3SQR-ZR from 16 GitHub repositories; a typical one measures about 57.8 × 45 mm and carries around 123 components.

75% use four copper layers or more, and 46% carry an open source license.

The most starred is Rp2040-memcard by tschicki.

Microcontrollers on boards using the APS6404L-3SQR-ZR

APS6404L-3SQR-ZR: common questions

Where can I find a APS6404L-3SQR-ZR reference design?

Each of the 24 boards on this page is a real design using the APS6404L-3SQR-ZR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the APS6404L-3SQR-ZR VDD_8 pin?

The VDD_8 pin has a decoupling capacitor on 15 of 15 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 15 open source designs using the APS6404L-3SQR-ZR.

What pull-up resistor is used on the APS6404L-3SQR-ZR CE pin?

The CE pin has a pull-up to 3.3V on 13 of 15 designs, most often 10 kΩ (then 100 kΩ). Counted from the KiCad layouts of 15 open source designs using the APS6404L-3SQR-ZR.

What parts are used alongside the APS6404L-3SQR-ZR?

The W25Q128JVPIQ, RP2350B, 74HC4052BQ,115, AO3401A and CH217K appear in the most repositories here.

Which microcontrollers do boards using the APS6404L-3SQR-ZR use?

Most are built on RP2040/RP2350 (14), FPGA (6), ESP32 (1) and NXP (1).

How big is a typical board using the APS6404L-3SQR-ZR?

The median is 57.8 × 45 mm, and 25% are two-layer designs.

What is the most popular open source board using the APS6404L-3SQR-ZR?

By GitHub stars, Rp2040-memcard by tschicki, with 202 stars.

Can I simulate one of these boards using the APS6404L-3SQR-ZR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part